PARLOSWaterfall Widespread Bathroom Faucet Two Handles with Metal Pop Up Drain & cUPC Faucet Supply Lines, Doris (Brushed Nickel)

The faucet has a great look and is well built. They really compliment the look and function of our new vanity. I installed it myself. The installation was pretty easy. Be sure to use plumber's tape on the drain, and silicon grease on the o-rings of the snap-on fittings. Have been using for the last month+ with no problems. I did not use the included 3/8 x 1/2 hoses, and I bought new BrassCraft Braided Polymer Faucet Connectors from Home Depot. Be sure to use a wrench on the faucet connector when tightening and don't over tighten per the instructions. The install should be fine and leak free.Really like these and would recommend.

Got sink and bathtub fixtures. They are brushed nickel and beautiful.

Love the sleek design and the quality. We have had it installed for about 2 weeks now and so far it works great. My husband had installed it himself and was pleasantly surprised with the quality. We have purchased several name brand bathroom faucets for our homes in the past and he said that this had to be one of the best made fixtures for the price. It was well packaged when it arrived and it wasn't chipped or scratched like some other reviewers have seen on their product. We also have a water softener and filter installed, so it may prevent from buildup and stains on the faucet.

Just a Note to the next buyer. I gave this a nice grade and score because it works great and is everything I wanted for the low price$$.But, I must say that I had a problem initially with the water fall losing its flow rate and would eventually slow down to a trickle. The remedy I found to work was to back-flush the faucet while fully installed in place. I simply removed the quick connect rubber manifold from behind unit, and took air pressure at approximately 60 PSI (seemed to work well) and blew it back thru the faucet by inserting the portable air nozzle into the faucet (blocking and plugging any residual blowback as best I could with a shop towel or something) and hooking the manifold back up to test flow rate. I had to do this process three times and it was a charm. It’s not that hard to do if you have portable compressed air, and easy access to the back of the sink for quick release of the rubber water manifold. It has been great for a couple of months now, so I feel I got out what ever was in their blocking my water flow.

This faucet appears to be of very high quality, especially considering the price.In anticipation of low flow I removed the tiny rubber O ring in the flow restrictor, (remove the two phillips screws under the base of the faucet, pull out the brass mount/connector & the restrictor is in the base.) Plenty of water flow & minimal splashing, very quiet.The only problem I had was getting the drain to seal, I fixed this by wrapping the threads with ptfe pipe tape. The drain is a VERY thoughtful design, to clean the pop up mechanism, just grasp the plug and pull up, clean & push back in place.

Easy to install, looks great and is different than your standard, boring faucet. The only thing I would say to watch out for is if you have a shallow sink, the water splashes out a bit because of how it flows out from the faucet (but that’s not an issue with the faucet itself, more of a heads up).

Very pleased

Built well. However, the drain stem is not built for thinner sinks. The thread is not threaded all the way and jam nut bottoms out before it gets tight. Big problem, bought 3 of them.

So nice 👍🏼

Perfect if your predrilled holes are set further back. Works great so far for an off brand for a fraction of the price

really happy with the faucet overall