VCE 50 Pack RJ45 CAT6 Connector

Great connectors. Great price. Easy to use. And functions like any other plug.

After 20 years of wrestling with traditional connectors, I finally tried pass-through style plugs—and wow, what a difference! These connectors have completely transformed my termination process, eliminating unreliable connections. The pass-through design removes all the guesswork, and makes it so easy to ensure you're getting everything right. No more squinting to check if wires reach the pins perfectly (which is harder as you get older for sure!) just push them through, and crimp. With traditional plugs, even careful work could result in dodgy connections. These guarantee success every time. I've had 16 successes out of 16 attempts so far, so that's a great feeling! Obviously these work better if you have the right crimping tool (which has a blade for trimming the excess cable sticking out the plug), but I used them with my trusty 15 year old crimpers and they worked just fine. The only post-processing I needed to do was to cut the excess with flush cut trimmers and a stanley blade. They're good on price too, especially when you consider the cost of losing time and connectors when trying the traditional approach.

The idea of passing all the wires through the connector is a good one to check the sequence. However, you need a dedicated crimper specially designed for these connector to crimp and cut excess wires at the same time. Other reviewer say cut the excess wires and pull back a little then crimp. Every time I did this the whole wires came out fully out of the connector as the tolerance is only micromillimeter. Do not waste your money only if you buy expensive high quality dedicted open RJ45 crimper. What a nightmare having wasted my morning with huge disappointment. Next step for me is to buy special crimper which is very expensive and I only need to use it twice. Hope this help you making your decision. Update, I have now used a dedicated crimper to crimp and cut excess wire. I have now got excellent result with these connectors. Having said that the crimper has failed after 2 uses, so went back to my normal crimper and I have cut the excess wires with a scissors. This was very fiddly but worked after 2 trials. The massage is if you are like me a DIYer who never done RJ45 before then do not expect an easy job, do trial run on few connectors before you tackle the proper one. I now know why these connectors comes in a bag of 20 or 50 or even more. More chance for me to eventually get is right. I have upgraded one star to 4 as earlier assessment based on my lack of skills. However the connectors are very good.

Perfect, much better than the old non-pass through ones I've had in a bag for decades now. Thrown the old ones away, these are the future! 😊

Originally i bought a kit containing various tools and RJ45's connectors; i watched so many video's on how to do the connections and thought it would be relatively simple to do... WRONG!! Unless you have tiny hands then you maybe able to do this with the old connectors and many many people have, it could of been down to the fact that i had CAT6 cable so the wires and sheath were thicker but i did 6 connectors in total and re-did 4 after and still they didn't work. Desperate times were had and then found the ones with a load bar - again useless as the wires kept springing out when being pushed home, this happened every time so i thought that's it i'm going to have to employ an engineer.. THEN..... I came across these and OH MY GOD these are BRILLIANT; so easy to use and so easy to keep the wires secure even when you use the crimps as you still can pull through the cable tight and crimp. One thing i would say is you DO NOT need to use a specific Crimper as any will do and as i said previously i had one as part of the kit i bought which did the job absolutely fine, ok it didn't remove the excess wires but a simple sharp snap off blade did the job with ease.. All tested and all or working 100% fine. Will never use anything else again; 100% would recommend these connectors

Exactly what it said on the tin Not had any faults with the ones I have used so far Will order again

I came across this style of ethernet plug after recently trying to make some Cat 6 cables for a household job, (installing PoE WiFi access points) and ending up with cables where only 2 or 3 of the 8 wires would send a signal. I use to rack mount data centres a couple of decades ago, and was very practiced at making ethernet cables, but I seem to have lost the knack. Even back then, I remember could be a bit hit or miss. This pass-through style of plug (and the matching crimp tool) is a game changer, and makes the job quick and pretty much idiot-proof. I should point out that I'm using stranded Cat 6, not solid core. I know there's a lot of debate about this on various Internet forums, but in practice, I've had absolutely no problems with PoE or getting Gigabit speeds over stranded cable at lengths of up to 20 metres. I would only use solid core for runs of more than 20 metres or where I need weather-proof cable... and in those cases, I'd terminate it with a wall socket at each end, not a plug. Just my two cents.

Lätta att använda när man kan ha längre trådar och ser var dom ligger i kontakten i och med att dom går igenom kontakten

Comme il faut.

Ottimi e innovativi facili da crimpare

Simpel en effectief

iyi