55 Count 360 Degree Irrigation Fan Sprayer Plant Cloning Equipment Replacement + Free Drill BIT!

Was a little unsure about how these would work out. They are very small and didn't expect much from then. I mounted them in 1/2 pvc to create a mister system for my wife's flower garden. They worked great. They create a 5' mist pattern with about 60lb of pressure. I have it all set up on a timer and will run 2 times a day for 20 minutes and covers everything we want watered. I would recommend these if you want a good DYI water mister system for about anything. 1 note, after you cut your pvc pipe run water through before you put in the nozzles. The shavings from cutting the pipe will plug the nozzles. I still have to bury my system but am very happy with the outcome. will be building another one for the other side of the house to water her Angle Trumpets and orange tree.

I got really tired of the adjustable micro-sprayer heads from Home Depot. They would need constant adjustment, they would get clogged, they would break and they are expensive when you need hundreds of them. It was also a pain because you have to put down the 3/4" poly tubing then connect the sprayers with micro tubing. I ended up with these complex tangled sprinkler arrays.I bought these little sprayers because I wanted something simpler and less expensive. So I laid down a single row of 3/4" poly tubing and punched a hole every 3 feet or so in the tubing. I screwed these little guys in to each hole and now I have a great sprinkler system that is way simpler and way less expensive. The spray pattern is good, although there are definitely two dead zones where the spray is interrupted by the little supports. I have now done this for several flower beds. The largest one has 20 of these sprinklers in it. You can definitely see a drop in spray radius as you add sprinklers. With 20 heads on the same line, I'd guess the spray radius is about 2.5 to 3 feet. I will be buying more. PS - I did not use the included drill bit. I just punched holed in the poly tubing with the standard drip system hole punch. To clarify - these are NOT misting sprinkler heads. They spray a lot of water.

Exactly what I needed and cheaper to buy in bulk than at my local hydro store. I also bought because I forgot what size drill bit I needed which this was a saver on that since I would have been willing to buy JUST the drill bit for this price. Now because I had more at my disposal I was able to add more sprayers to my system, great buy and great value for sure

Pretty good kit,easy to work with, just drill your holes and screw in your shower heads. You may wanna use a little PVC glue for best results, as there are a little loose after u drill and clean out the holes. If your looking for misting for the green house like I was!! You may be getting more water then u need, so keep that in mind. Mister heads these are not. These are more of a shower/ sprinkles head type, they make an ok bell/fan shape under 60psi. But, I need a little less water.

I was skeptical about these and thought they'd be under powered. Holy sh(#, they're super! I am using them in my indoor aeroponics and they're over performing! I mean, they really do spray!If you need a sprinkler system, then this is the PERFECT product for you! The drill bit makes the perfect hole to hold the nozzles. I am VERY pleased with this kit and highly recommend it to anyone looking for a 360 degree sprinkler kit.

Used these for homemade sprinkler for the kids slip and slide. Highly recommend the seller. I received the item 24 hours earlier than I was suppose. The drill bit that it came with was perfect. Just used a metal ruler to mark a line down the pvc pipe and then placed 1 mister every 3 inches. Pre drill the hole and then twist the misters in. They all stayed in perfect and didn't leak.Everyone thought that we bought the sprinkler system. I can't wait to use the rest of the misters for other summer water fun for the kids. Great product I couldn't find anything like this at Walmart, Lowes or Home Depot. Great job Cz Garden Supply I look forward to using you again and I will recommend you to all my Mom friends who want to do this project.

Really good idea including a self starting drill bit in the package. I made some sprayers with 1/2 inch schedule 40 PVC. Just marked the locations for the spray nozzles, pressed the sharp point of the bit into the PVC, drilled out the holes, put a tiny bit of silicone grease on the threaded portion of the spray nozzles and pushed them in- Perfect!

They are significantly stronger than I thought they were going to be! I used them to create my own DIY cloner for tomatoes, basil, peppers, etc. I just installed them, and finished my cloner. Crossing my fingers, and here is to cloning all of my plants moving forward!

these sprinklers leak from where theyre inserted to the pipe, so they lose pressure and dont spray well

Product works awesome. I don't know why everyone is complaining that the drill bit is too big. It works perfect, you just cant sit there reaming out the hole otherwise it will be too wide. I used a full pack of these on a watering manifold that uses 3/4" PVC and I have zero leaks.

The drill is very slightly too big, so it's very easy to strip the sprayers while twisting them into place. Also the sprayers do not spray a fine mist, they spray strong in a couple of directions and nothing in others (this is with the 360 degree sprayers). And they need a very strong pump (1000 gpm) to work well at all.

Awesome sprayers worked great in my aeroponic machine

Misters where 2 strong psi for my uses and drill bit made 2 large of holes returned,