Beefunny Replacement Upgraded Flip Remote Car Key Fob 315MHz 4D63 Chip for Ford Lincoln Mercury FCC ID CWTWB1U345 CWTWB1U331 CWTWB1U322 GQ43VT11T

What a perfect replacement to be able to combine my key and fob into one device. Instructions were clear and precise on how to program and local hardware store was able to cut the key blank. The battery cover is a little tricky to remove, but that’s probably more user error than device.

I first took it to Ford to have it cut and programmed, but they LIED and said it wasn't compatible. I'd bought 2 of them so I was less than happy about it. However, I found a video online of a guy cutting the key and then showing you how to program it just by using the two original keys and turning them on and off a few times. Yes, it sounded awkward to do, but was actually easy and no one was more surprised that it worked than me! Here's how to do it after having key cut: 1. First original key, turn it on but do not start the car wait for "immobilizer" light to go out. then turn it off and within 5 seconds put in the next original key and do the same thing. Then with in seconds do the same with your new fob and it will remove the immobilizer setting so now the key will start the car. Now you're done with the immobilizer. But the buttons don't work... no problem. Take your original key and get ready to turn forward and back 8 times in a row. Very quickly. Keep in mind, you're not turning the car engine on, just turning the key forward to that point and then back. After the 8th time, you'll notice your car doors will cycle (meaning they will lock and unlock on their own.). When they do this, you'll just press the unlock button on your new fob IMMEDIATELY. I missed it first two times, but then was ready for it. Once you do this correctly, the key fob will be set up and everything will work. I couldn't be happier with the result. I promise you I'm a real person, in Chattanooga, TN. This is an honest review. Just follow the directions. There are also videos on youtube showing you this stuff too. Good luck!

it worked for a 2014 f-150, it just loses the remote start function because it does have the X2 button. If you have already the 2 original keys, it is very easy to program the sensor and to pair it the car.

The quality overall is what you pay for. The plastic is tough with no signs of breaking or flexing. My only concern is the responsiveness of the buttons. There seems to be an excuse so slight delay BUT it is still a great product. The key shaft is sturdy with no signs of flex.

My phone didn't save the pictures. When I get the key out of the bag first thing notice is the key has been cut, as well it doesn't stay locked open or closed. The back of the case cover is incorrect for that key amd they just tried to shove it on. The buttons weren't buttons. They were rocks that until you pressed super hard then the light would show indicating you pressed the button. As well the button to release the key to open or closed the hole in the case is wallowed out, looking like someone did it with a screw driver or a knife and jagged edges all the way around the hole. So obviously I didn't test to see connectivity to the vehicle. Can't speak on that behalf but it wasn't worth even trying. At this point so frustratingly, i set up the return real quick, mind you doing this in the middle of moving my girlfriend and her son in with me, and just immediately took it to khols to give me my account refund so I can try to give a different company a chance.. I don't know if this was a key that was sold before and someone tampered and sent back and no one checked it and just sent to me.. or if they are just that horrible at quality control that even junk like that makes it to the customer.. I can understand a sticky button or something not obvious. But this key wasn't even in one piece with the key hanging out of the housing while being locked in place. Either way rediculous this made it to a customer. I almost wish I could give a zero star. And I never leave reviews..

Great product! Worked well with my 2009 Ford Explorer. Very easy to program the remote and the key AS LONG AS YOU FOLLOW THE INSTRUCTIONS. They give you a link to follow and I posted a photo with the instructions that worked for mine. Make sure you READ & UNDERSTAND the instructions prior to attempting the procedures. SIDE NOTE: ACE would not program unless the key was purchased from them. Home Depot did it after I convinced them that it was a "Dumb Key" to just unlock the doors. It worked to manually unlock as well as with the remote. It started my truck on the first try.

Love it. Great upgrade to my 08 Mustang keys.

Used it for 2003 Mercury Sable, which is basically any Taurus or Sable 2000-2007 PROS: - no problem programming the remote itself for doors. - no problem programming the key and transponder, worked instantly - just follow their instructions. I cut the flip blade at a local locksmith for $7. - looks good and modern, less clutter in the pocket CONS: - short range, even with new battery Main problems: - the design and distribution of the buttons is not very good. I popped my trunk 3 times while turning on the engine, because your fingers will most likely press them by mistake white turning the key. - there is no tactile differentiation between buttons (you can't feel with your finger which one you are pressing). In low light, you would need a light source to look at the remote and see what you need to press. I fixed this by adding one drop of clear epoxy on the unlock and lock buttons, and now I feel the bumps with my thumb without having to look at it. Overall it is less functional on the button level, but looks modern and takes less space than having a separate remote and key.

It arrived fairly fast, looks amazing and works perfectly. It costs 10 cad to have it cut in less than 5 minutes at the local locksmith. I bought this for my old 2006 Ford F150 XL 4x4 5.4L and it's working. Took me less than 3 minutes to program the key itself (doesn't turn the engine if it's not programmed), and another couple minutes to program the remote, as they shows here. No need for searching the web, checking youtube, etc... Was easy and straightforward. Thank you! I will buy from this seller again. Highly recommended good quality replacement, better than my original ones.

Se programo y se llevo a realizar la copia de la llave con el cerrajero, todo perfecto desde el.inicio.... El chip es idéntico y el control de abrí y cerrar candados de puerta excelente

Bought for Ford Taurus '12, the Key and the Fob programmed flawlessly in less than 3 mins. The quality is good, just missing the ford logo in the back. one more thing, this Fob doesn't support quick double click for function like "trank" or "open all doors" like the original Fob, you have to wait about 1s before the 3nd click. I was happy with the 1st purchase so I made my 2nd one The e fob comes without the key, and the lock button doesn't click right, I had to return it. 2 Stars vanished.

Muy buena calidad, solo me programaron el chip para el arranque e hicieron la llave, la programación fue muy sencilla yo la hice de los 4 botones del control funciona muy bien tiene buen alcance Fué para un Ford Fusión Sport 2010

Me encanto el funcionamiento y buena calidad de la llave !!!! Muy fácil de programar