DIY Leathercraft Accessory Brass Soldering Iron Edge Marking Tool Single Line Leather Edge for Sealing, Arc 4 Groove

Description

Color:arc 4 groove Name: Electric branding iron and ironing head for leather ironing Controllable temperature range: 200~450 degrees Celsius Specification: single head, 1mm, 2mm, 3mm, 4mm Voltage power: 220V 60W Product features: handle temperature is low, feel light, electricity can be a minute tin welding, automatic temperature, temperature recovery. The heating element is easy to be replaced, the efficiency is high, and the power consumption is low. Note: please pay attention to safety in use, to prevent burns. Instructions for use: 1, positive and negative cut edge, so that the edge of the leather becomes smooth; 2, along the direction of the crop edge of polished leather; 3, after grinding smear sealing liquid; 4, because after the cut edge of the leather edge is a semi-circular, so the side should also apply sealing liquid; 5, waiting for the closure of semi-dry after grinding; 6, the use of electric iron iron back and forth, making the closure of liquid penetration evenly, repeat 3-5 steps can be; 7, complete. Edge effect: 1, leather side smooth and shiny; 2, leather edge with a soft, curved edge will not crack; 3, wear, even with a nail scraping edge, it will not fade. Use of soldering iron: 1, the use of a screwdriver to remove the original tip, the installation of copper head, (pay attention to ensure that the copper head into the deepest); 2, the temperature adjustment at 200 degrees Celsius, and then plug in the power (the first time you will use white smoke, which is normal, the future will not appear); 3, the red light will light up, wait for some time, it will go out, on behalf of it is the state of constant temperature; 4, once again adjust to the temperature you need, the indicator light will be lit again,after it go out again, the temperature is equal to the temperature you adjust .