Stone Banks Snow Foam Lance for Bosch Aquatak/Black & Decker/Norse/Ryobi/Neo Foam Cannon Adjustable soap Sprayer Nozzle Foam Bottle 1L, Foam Gun for Pressure Washer

…Bosch EasyAquatak 120 [or the 100 model] and you use it for car cleaning in particular you may have found the Bosch detergent dispenser a little on the small size for using with ‘SnowFoam’ – I certainly did when doing our 2 cars and when using it with a special diluted fungus killer.The answer was to purchase this Stone Banks dispenser which holds 1 litre of mixture and is made to last. The lance attachment is easily fitted and removed once you get it lined up properly and the fact that most of the parts that will take both stress and pressure are made of good quality brass is excellent. The nozzle itself is adjustable in 2 ways by either rotating the top dial to control water flow throughput and/or then by rotating the nozzle itself to adjust the spray pattern.I notice that this item has had an almost 20% price reduction from when I purchased mine but I am still very happy with my buy and also very happy to recommend this product as extremely good value and an aid to getting the job done properly.Thank you for your time in reading my feedback/review – I hope it may have helped you in your buying decision.If this feedback/review has helped in any way please be kind enough to click on 'Helpful'.

I'll start this by saying, I've been detailing cars for 15 years and used 6 different snow foam lance attachments like this one before.Packaging is good, instructions are ok but limited in what they tell you.For a start it didn't fit my pressure washer, the attachment is almost the correct shape but there is a very slight difference when comparing it to my last one. To solve this, I had to take it apart and fit the attachment from my old snow foam lance, not a great start.Once on the pressure washer it hardly produces any foam even on the minimum setting and using dilution ratio's I have in the past with other foam lances. Very watery foam and used the whole bottle very quickly. This is something I've never experienced as I'm used to being able to produce foam that is too thick as my pressure washer is quite powerful.Totally worthless as a snow foam attachment, and I assume, because I took it part and there are marks on it from spanners etc I won't be able to return it. Waste of money, try another one.

The media could not be loaded. It was a struggle to find a snow-foam gun that said it fitted the Titan pressure washer. I'd read that Titan and Black & Decker used the same fitting and this listing said it fitted Black & Decker, so I took a punt...and it worked! It was a bit difficult to take out of the pressure washer gun at first, so I smoothed the brass edges with a small file and it seemed to do the trick. Just a tip for maximum foam...turn the dial to the "minus" setting and it squirts the most foam. It's nice so far!

An absolute essential bit of kit for anyone who is into cleaning their car. Can be a bit fiddly to get on and off the jet wand. Spray wise though once you get the right mix of water and snowfoam it works a treat.

For the money, this is an excellent spray. Good brass fittings and foams really well in a broad flat pattern. A little tricky to fit on the Bosch. Not sure if it needs filing on the tongues or whether it's just because it's a new pressure washer and needs to bed in, but once you've wrestled it into place, it is as good as any I've used.

The product looked quite good quality, but it does not fit the Norse Jetwash wand. It was the right shape but no way was it going to fit at all. The text in the claims it will resulting in a huge waste of time hence the rating.

It did "Snow foam". All the neighbours stood in amazement! Used TurtleWax product, didn't need too much. I think I was expecting it to just lift a years worth of dirt off however still required some elbow action. Product worked well and I would recommend. This is the correct fitment for my machine lance, if not a little snug on fitment.

Purchased this as an upgrade to the rather small, plastic and flimsy unit that came with my washer. Filled the bottle with snow foam detergent, connected to the lance of the washer, pulled the trigger and got nothing but a jet of water, adjusted the nozzle and flow rate to the bottle, made no difference. After trying every combination and generating a complete lack of foam I opted to revert to the unit that came with the washer.Removal of the new unit resulted in it separating at the threaded point of the adapter, the connector part being flush with the washer lance and not able to be removed by hand. Reattaching the bottle and firmly tightening made no difference to removing the connector resulted in the same outcome and tightening further would have been excessive and risked damaging the washer. After several attempts at trying to remove the connector this way my effort moved to wanting an operational washer and by gripping with a pair of mole grips I was able to remove it.Unfortunately this has damaged the thread of the unit and it cannot be reassembled and it is nothing more than landfill.Product appears to be made of quality materials and looks impressive. I may have been unlucky with the unit I received but my experience is of poor quality construction and ill conceived design. I would encourage any buyer to search for a product specifically designed for their washer rather than one that uses adapters to accommodate several manufactures products.