Professional 6L Hot Stone Massage Heater Electric Massage Stone Spa Salon Warmer Heating Volcanic Energy Stone Device

Description

Direction for Use:1. Put the hot stone in heater and add water until the hot stone is completely submerged. (Adding hot water directly can shorten the heating time)2. Plug in the power switch, when heating, adjust the temperature control knob to the preheating position firstly, it can quickly heat the water to 65 degrees(the whole process of preheating takes about 15 minutes, warm water can shorten the time).3. Immediately after the water temperature reaches 60 degrees, turn the knob to the temperature control range. Pay attention to the water temperature until it is stable at 55 degrees.Heating at this temperature is continued for ten minutes to ensure that the heat is sufficiently absorbed by hot stone.4. To avoid burns: the temperature of hot stone should not exceed 60 degrees, the average person's skin can only withstand 55 degrees)Note:1. When adding water to the heating pot, the water level should not be too high, not too close to the edge of pot, prevent the water from overflowing when the hot stone is released.2. The lid should be lightly handled to prevent cracking and breaking.Specification:Item Type: Stone HeaterMaterial: Enamel + Aluminum Lid + Stainless SteelColor: As Picture ShowsCapacity: 6 QuartVoltage: 220VPackage Size: 51 * 37 * 24cm / 20 * 14.6 * 9.4inchPackage Weight: Approx. 4313gPackage List:1 * Enamel Inner Pot1 * Stainless Steel Exterior1 * Spoon1 * Lid 1 * English Manual