2 Pack Dimmer Light Switch, Universal Lighting Control, Single Pole or 3 Way, Compatible with LED Dimmable Lamp, CFL, Incandescent, Halogen Bulb, Decorator Wallplate Included, UL Listed, White

These dimmer switches work perfectly! They provide smooth, precise control over my lighting, and installation was straightforward. The switches feel solid and high-quality, and they are very responsive. Considering the incredible price, this is an excellent deal for anyone looking to upgrade their lights. Highly recommend for both home and professional use!

Purchased two because one was the same price but had it installed same day and it look great and works well.

Bought this to replace a GE switch in a 4 gang electrical box because the price was much cheaper, this switch is a little larger than a typical GE rocker switch so when I put the wall plate on this switch would bind and not work. If you’re using this switch in a single gang with the included wall plate it should be fine but beware if installing in a multi gang box with a different brand of rocker switch. The switch itself seems to be decent quality

So I like these switches so far. They are fairly loud/clicky as far as paddle switches go, but that's not really a problem for my usage. For reference, the noise level is comparable to the Eaton (non dimmer) paddle switches I bought from the big hardware chain. They feel just like any other paddle switch and are extremely similar to the GE dimmer paddle switch I bought a few years ago. Standard installation with 4 wires and wire nuts. I cut the wires a little shorter before installing them because my switch boxes were already tight without the extra 4 wires and wire nuts. Lots of reviewers have mentioned issues with dimming and flickering, and I've had a peculiar experience with that. First off, I like the dimming adjustment--I didn't think I would care about it but it's a really nice feature to have. I was able to tune the dimming brightness to exactly the setting I wanted. I'm using two of these switches with a bathroom vanity fixture that has four G9 light bulbs. I got some dimmable LED G9s and I've had no issues with flickering. However, when I tried one of these switches with a standard E26 dimmable LED, I got a lot of flickering, even with a bunch of adjustments to the dimming level. I suspect that could be related to my old socket/fixture or the wiring on that particular circuit, but I'm not an expert and it's hard to tell. I want to try a few more light bulbs before I can say definitively. Overall I'm happy with these, but YMMV with the dimming and flickering. If you're having flickering issues, try adjusting the dimming settings or try different light bulbs before you give up!

These BESTTEN dimmer light switches are good quality and work smoothly for both single-pole and 3-way applications. Installation is straightforward, and light control is precise. A solid lighting control option.

I bought these after living with bright lights in our living room for a year. I put a few of the dimmers in a few locations in the house and the living room is a 3 way switch. I spent hours trying to figure it out and never could. I found the constant 120v with a multi meter. I then hooded it up in every other combination there is possible. I don't know if it's the way the original electrician wired the boxes or the dimmers themselves. I tried one location and then the other location. No matter what I did the lights would sometimes work and sometimes not. Usually would work better with 80% or more brightness. Any lower would sometimes work and sometimes not. Or work for lets say 5 times on and then not at all. Very wonky. Lastly I was going to leave it, but the back part is so wide and the metal they used around the fixture (maybe for spacing) would hit the wide black backing and I could not even install it in the right position for the face plate that had two other switches on it. So In the end I could not use the 3-way. On the other single pole switches I installed them really easy no problems there, but every time I turn off the light and the go to turn on the light it wont turn on until I flip the switch off and then back on again. Very annoying to have to almost like reset it by flipping the switch on and off. I was excited for these and will just use them for the single pole locations, but I'm just settling. eventually will probably replace them for something else.

These arrived as described and were used to dim can lights. They worked beautifully and we will order them again.

These have an adjuster, but it does not work well. My LED lights flash with these dimmers. I’ve had to replace every one of them with a better quality unit. I do not recommend these.

Seem to be doing the trick for my needs in our den. No quality issues so far after 3 months. I would use them again.

The dimming on led light doesn’t work…it’s flickering.

Works good, good price. The only problem is I ordered the wrong Color should have been almond not ivery.

belle couleur

We installed them in kitchen works great