Pit Boss Helmet, Matte Black, X-Large/XX-Large

Fits low and snug, visor to thwart the low Sun and a built in shield.

The ultimate half helmet. Comfortable and ruggedly built. Came with a BELL sticker too! The pit Boss will spoil you and make you ignore your full face. That’s not good! Lmao

For me, this helmet a great fit. I like the zippered removable ear pad for colder days.

I order two of these. both were marked XL/XXL, and both were definitely smaller than indicated. When I tried to adjust the headband to max size, both of them had the right-side headband end come out of the adjuster and I could not get them fed back in. The headband mechanism is very cheaply made. I thought about cutting the adjustable headband out as many people had commented on, I had little confidence in the fit as the helmet has a tendency to slip forward on your head without the headband adjuster. Sent them both back.

I needed something for summer, my full-face helmet is an oven. This was exactly the relief I need from the summer heat. Pros: Lightweight The flat black finish looks great zip out ear muffs Fit adjustment in the back side of the helmet is easy to use. The strap is easy to thread and tighten. Built-in sunvisor Cons: If you wear eyeglasses, the sun shade can be difficult to get down over the eyeglasses. Sunshield touches my nose. My helmet is sometimes crooked on my head, and I don't know it until I look in the mirror. Vision can be slightly distorted depending on where you are looking. Compared to other helmets like the HD J03, it is less than 1/2 the price and great quality.

Generally a very nice helmet. I've owned Bell helmets for years and trust the brand. I have four complaints, though: 1. The smoked visor is really awful. It's hazy and if the sun hits it from the side, it becomes nearly impossible to see through (much like a hazy windshield in your car when the morning sun hits it). I cleaned it carefully and examined it - I don't see anything to explain the lack of clarity other than manufacturing defect or poor quality. I ordered a clear visor and am very happy with it - I use it with sun glasses so I don't really miss the smoked visor too much. 2. The visor rests on the bridge of my nose when it's down and if I push it up a little, it drops back down. This can get very uncomfortable. I can't tilt the helmet back enough to make it clear because of the adjuster and the design of the rear of the helmet. I may take my Dremel tool to it to raise the nose notch up a bit, but out of the box, it doesn't fit as well. 3. Reference #2 - It may be the shape of my head, but the padding in the lower edge of the rear of the helmet protrudes quite a bit into the space where your head goes. Combined with the adjuster, it makes the helmet difficult to wear comfortably for me. The back of my head is fairly straight down to my neck, meaning that the protrusion presses against the back of my neck, forcing the front of the helmet down. If you have a bulbous rear skull, this would probably fit really well. I may experiment with removing the adjuster and see if that helps. I've got it run all the way out and it's 'acceptable', but doesn't allow me to change the position of the helmet during a long ride to relieve the pressure on my neck. Lifting up presses harder on my neck. Pushing down on the front presses the front down over my eyebrows uncomfortably and makes use of the visor impossible due to #2. 4. The ear cups in the zip-on insert for a helmet headset are a nice touch, but tend to put the speakers slightly too low for my head and they aren't adjustable. I have to put on my helmet then press the pouches up a bit so that the sound is playing into my ears instead of below them. Again, it's probably got to do with where my ears are on my head, but the lack of adjustability is a bit of an issue for me. All of that said, I still like the helmet for the most part. I think some of the problems I have relate to the DOT specifications as I have another more traditional helmet that has the same issue with the back of the helmet. The government, as always, mandates that things meet a one-shape-fits-all protection, which just doesn't really work if you aren't the one shape they mandate! The only other thing that I wish was that Bell had a summer insert for the speakers. The one that comes with the helmet is fairly heavy and insulated which will be nice in cooler weather. But if I want to talk on the phone or listen to the radio in the summer through the headset, I tend to sweat quite a bit due to the heavier insulation. Perhaps I'll have someone make one that can zip into the existing zipper and only provide the ear cups portion for the summer. EDIT - 2/23/2017 - Ok - I've been using this helmet now for a year and a half and I've decided to give this helmet another star. Here's why: - Even though in the original review I mentioned possibly removing the adjuster, I did not realize until recently that the adjustment mechanism is removable without damaging the helmet. It actually snaps right out - this is a very good thing for my head shape. The adjustment system is probably great for a lot of folks, but it pushes the helmet forward on my head to the point where the visor presses against my nose. I got around this by buying a sheet of 1/2 thick high-density foam that I put in the top inside of the helmet, but it was never really satisfactory. When I took the adjuster out (just follow the side straps under the liner and give them a good pull - they'll unsnap - then do the same on the main piece in the back), suddenly the helmet fits perfectly and the visor sits nice and straight and doesn't hit my nose. If you're having problems with the visor, you probably have the same problem I do. Just remove the adjuster! If you're careful, it will snap back in without problems, so you can try it both ways. Also, you might want to note that there are several adjustment holes in there, so you may be able to readjust the position of the adjuster to make it fit you better. - Unless it's Winter, don't bother with the pouches for the speakers. I switched to a half-helmet headset for my Harley iMC Motorcom HS-H140P Half-Helmet and Helmetless Headset for 7 Pin Harley Davidson Audio Systems and during the months when it's too warm for that neck curtain, this is probably the best solution. I have added some pictures that show the removed adjuster, where you can see the snaps that it connects with. Also, a picture of the snap holes in the rear of the inside and one of the adjuster holes on the side under the liner. Note that the side snaps are way up under the liner - just follow the side strap for the adjuster and you'll find them. I like this helmet enough that I am going to purchase a second one for my wife, now that I know more about it. I still have to mark it down for the included visor and no summer version of the headphone curtain - I would still prefer that to wearing an external headset, but those are minor items that don't detract much for an otherwise excellent product that lives up to the Bell name.

I liked the build quality of this helmet a lot, the cost was approachable too, unfortunately the fit for me was a no go. The shape of one's head determines what one can wear upon it. I had to return it. But still gets five stars from me for other attributes.

Comfortable helmet!