Aftermarket Tire Pressure Monitoring System TPMS with Solar Power Panel Real Time Monitoring Tires Pressure and Temperature with 4 Wireless & Waterproof Cap Sensors

Description

Size:4-Wheel Car TPMS Monitor Display:LCD Working temp.:-20-75℃ Storage temp.:-30- 80℃ Voltage:3.7- 5V Current:<3mA RF transmission frequency:433.92Mhz±50KHz RF signal reception sensitivity: -90dbm Sensors Battery Model:CR1632(Changeable,steps to change battery,pls check the photo NO.9 of this solar TPMS) Battery: ≥2 Years Working temp.: -30- 80℃ Storage temp.: -35-85℃ Pressure: 0- 3.5 bar(0- 50psi) Temp.: ±2 ℃ (25℃) Working Pressure: 0-99Psi Accuracy±1.5Psi IP: IP67 Power:<10dBm Frequency: 433.92Mhz Dimension: ≤21mm(diameter)*17mm(high) Tips for Sensors Installation 1. Make sure receiver is open when installing sensor. 2. Prepare corresponding sensor and anti-thief nut. 3. Take off cap of valve, make sure the top of valve is smooth, no break (or there will be leakage) 4. Screw anti-thief nut by clockwise 5. Install corresponding sensor by clockwise (don't force it too hard to damage sensor) 6. Check leakage by using foam, ensure no leakage 7. Tighten anti-thief nut by wrench with reverse, make sure anti-thief nut is close to external sensor(fix sensor by left hand, wrench moderately force by right hand) 8. Installation other sensors by the same method. Package Including: 4x Cap Sensors 1xPlastic Cover 1xUSB Cable 4xScrew Rings 1xPlastic Ring 1xSolar Car TPMS Monitor 1 x English Instruction Manual