Wen BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring

I tried cutting the LVT with my regular table saw blade and while it worked, those blades are a little aggressive. after I ordered this blade and mounted it on my table saw I had no more burning and really rapid, smooth cutting. I was skeptical of only 4 teeth at first, but that seems to be what was needed. The blade went through the vinyl easily and there was no chipping on the topside. highly recommend to anyone

This blade worked great for cutting hardiplank siding at more competitve price than the comparable one at the local big box store. Used to replaced siding on half of my home and it is still cutting great.

Happy with this purchase. Blade has held up very well. Have been cutting hardy boards for my porch. This has been very helpful.

This blade is awesome, I used it to build a 12x16 shed and cut multiple sheets of hardy siding. It even cut through my wheelbarrow! I think I may use it to cut my metal roofing sheets too! Highly recommended.

I didn't want to pay 50.00 at the hardware store for a similar blade so I order this one that came in less than 24 hours. I lasted through enough cuts to do a average size bathroom with life left in it. I have purchased several WEN blades and they have all worked great and lasted. Great bang for the buck.

You tube shows using a 4.5 inch grinder to cut backer board. Hour later all I had was a pile of dust and went about 3'. I bought this blade as a Wim and boy I'm glade I did. Cut 5' section in 30 seconds. Clean and VERY little dust.

This blade was fantastic for the price. I just completed residing our house with hardie planks. This blade was used the whole time and this blade gave me nice and clean cuts to the end. Had about 1700 sq ft of siding with lots of windows to cut around. Definitely recommend this blade

Does the job itself made for. Cuts laminate flooring with ease and with clean cuts.

Good small job blade. Did all the cutting of the Hardy board used to side my shed with this one. No issues, smooth cuts, very little dust. Haven't used it since so uncertain how long it will last in the long term but can't beat the performance at that price. Would recommend.

So far this blade. Has cut very well, has not lost teeth. So far probably cut 200+ feet and still working as new. Hopefully will last through my whole job.

I only done about 10 cuts on cement board ,but from first to last it cuts great.I would buy it again.Works great!

Needed this blade for my cordless Dewalt circular to install hardie board sheets and hardie shake. Ripped 40 or so sheets of 4x8 ½ inch hardie with no problems and cut probably 200 hardie shake planks. Smooth straight cuts every time with no tear out in the cut edges.

Highly recommended. I bought two blades to set up my mitre saw and skill saw for siding my house. I should have bought three just for the convenience of having my table saw ready to go as well. I have ripped 12’ boards with ease, not even any heat build up. Dust is manageable with a respirator and shop vac set up or just cutting down wind! HIGHLY RECOMMENED