anidees Graphic Card Cooler 3 x 80mm PWM Fan, Support Aura SYNC/Mystic Sync/Aura RGB/RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL

I purchased a computer recently, and opted for a 5700XT by Radeon, and instantly noticed that the GPU runs very hot. I opted to mess with the fan settings with the software, but found that reverts back very frequently, and have had a few crashes that I can correlate to setting changes. This problem with it running hot, causes the GPU to throttle back and compromise the performance when I would hit about 77-78C. I opted for this fan to see if it could correct the issue until AMD was able to rectify their software and correct the fan settings. I will say, this fan has cooled my GPU between 7-10C both at idle and at load. You couple this with some cool RGB that work nicely with my other lights in the case, and I'm pretty happy. I read others having problems with the installation, but I have a large case, and I had no issues with the install, nor the hooking it up and making it work. Would recommend to anyone that struggles with elevated temps on their GPU, as this will help with the longevity of the card to run at cooler temps.

Got this for our customer that was having problems keeping his overclocked 3090 board running without being throttled while he was "playing" games. I highlighted playing because this fellow takes his games very seriously and enters all the contests or meets (whichever is correct) and from what he says has won quite a few. We didn't build this unit but somehow he got it from Dell as a gratuity. Its is the latest Dell R12 and the way it is setup you can only have 1 - 3090 due to space issues. Dell, like most of the other consumer assemblers, tries to use the smallest case, motherboard, etc. to maximize their profits. So there is little room for any kind of cooling, however the CPU does have liquid cooling and we recommended the card should have the same. Anyway this cooler fit in between the two slots left because the connector you see coming down is merely a piece of metal and it does not need to connect to the MB by using a PCie slot. It has its own 3 & 4 pin connectors as well as a SATA for power. His temps were in the ±90°C and he felt the GPU was being throttled at those temps. We put the fan card in and had him start using the unit and while the temps only hit the high 60s and low 70s. I offered to build a unit for him for cost but being still in college he needs every penny. Basically we solved his problem for less than $50.00 and 20 minutes time. If you have any problems with heat, or you just want to treat your unit, this board will get you there quickly and economically. It takes two slots and ideally it should go into a PCie slot, but as I said above they don't have to be on the MB slots - just need the ability to fasten it in. It is built solid and not just 3 fans screwed together.

The "Doesn't really help" review By Tyler on August 26, 2020 said it all then & I am reiterating it now & more; There is the horrible noise issue at startup that has never been fixed & I thought that was my GPU pulled it all apart new thermal paste & cleaned all the dust then found out its was on of the fans on this. Aura Sync STILL DOES NOT WORK even after this many updates a year later. On top of it the mounting mechanism for the PCIE is just a tiny cheap piece of plastic that does not go all the way across the PCIE slot (Good if you want to mount in a mini slot bad otherwise). I only recommend if you are going to give up on aura sync & will decide instead to vertical mount it like I gave up & did& leave it in rainbow wave or another preset mode. I also know they as the manual says to press power button twice to enter motherboard sync mode but still not able to pick it up & everything else works. Also please excuse the picture I am switching to all AsiaHorse Matrix fans as well as their RGB fan hub which will actually sync unlike these! Warranty just passed July like 21st & I just had time to try out aura sync & clean my GPU since I am modding my PC case & everything so RIP me. Wow just 2 days later & just like everyone else said the left most fan literally died.... No longer works, surprise surprise it's the one that has been making the mechanical noises this entire time... Please save yourself the trouble & go AsiaHorse! Update, after about a month to a month of a half of my last update saying one fan stopped working practically completely or completely the entire device died & no longer works.

Here’s the scoop. These fans do work and will cool your GPU. However they are reasonably noisy. They’re not as loud as much at would say they carry a distinct noise. The problem is that once you go into bios and set these to PWM mode and make the fan noise tolerable, the performance/cooling gain becomes negligible if not barely noticeable. If you want to run them in DC mode they will cool your GPU significantly. I noticed a 5-6c drop. I even got a little extra CPU cooling. I think this cooler would be best served in a closed front panel case, maybe even an ITX case where there is minimal ventilation and better noise cancellation. But if you have a high airflow case with a mesh front panel like mine then they can always be heard no matter how low you set the RPM. It can be tolerable but I plan to eventually pull them out of the case because I just don’t want the noise.

Without the proper RGB connection to my Gigabyte MB this cooler is just noisy. The RGB LEDs are too dim to add any color to the system so... useless.

Sehr guter Grafikkarten Kühler! Ich habe mir von Anidees diesen Grafikkarten Kühler gekauft, um bei meinem Gehäuße den Airflow für meine Grafikkarte zu verbessern. Zum Kühler an sich, dieser ist sehr Hochwertig aus Metall verarbeitet, und macht einen guten Eindruck. Der Vorteil an diesem GPU Kühler ist, dass man diesen noch zusätzlich über Asus Aura ( Gigabyte Fusion o. Mystic Light) ansteuern kann von der RGB Beleuchtung her. Damit habe ich bei mir nun alles passend einstellen können mit meinen Ram, anderen RGB Fans und den GPU Kühler hier. Es gibt auch die Möglichkeit die Beleuchtung oder die Lüftergeschwindigkeit über die mitgelieferte Fernbedienung zu steuern. Bringt der Grafikkarten Kühler auch was? Ja! im Schnitt habe ich ca. 3-5 Grad kühlere Temps mit diesen Kühler. Ich habe das ganze u.a in Furmark getestet. Auch beim Zocken springen die Lüfter meiner Grafikkarte erst später an. Lautstärke: Auch auf der höchsten Einstellung ist der GPU Kühler so gut wie fast nicht wahrzunehmen! Was mir Persönlich auch sehr Wichtig ist. Fazit. Super GPU Kühler der Sehr Leise ist, und eine schöne RGB Beleuchtung bietet welche man über das MB wunderbar steuern kann. Von mir eine ganz Klare Kaufempfehlung!!!

3080で使用てますが－2℃くらいでしょうかあまり効果がありません。 本当にお飾り用です。 追記 装着13日でファンから異音が出るようになりました。 スマホがテーブルの上でバイブレーションしてるような音で結構うるさいです。 返品も面倒なので捨てます。

Es justo como se ve en la publicidad y de inmediato se nota su excelente calidad

Very easy to install and does cool down like it's supposed to I do recommend this product.