JJC Aluminum Lens Cap Cover Protector for Ricoh GR IIIx GR IIIx HDF GR3x HDF GR III GR III HDF GR3 HDF GR II GR2 with Soft EVA Interior -Black

Really nice aluminum lens cap — solid, premium feel and a perfect fit on the GR III. It’s a joy to use, adds a bit of weight in a good way, and protects the lens. Highly recommended.

Good quality

I got this to protect my new GR IIIx when the camera is in my bag. This will hopefully keep some dust away when the camera is not being used. The only issue is you need to remember to take it off before turning on the camera... it's pretty snug and might not pop off causing a lens error.

It's a metal lense cover with a soft lining. Works good!

I just got the gr iii and wanted a way to protect the closing elements in the front and to keep dust out of the lens when not in use. This cap fits perfectly and has the felt liner all on the inside (including the part that makes contact with the camera ring). Make sure to follow the instructions and to press it on when you first get it and leave it on for 12 hours before removing it. This is made out of metal and looks like it will last. I used a label maker and made a label for the front of the cap that says "remove first" and one label on the ridge of the cap that you can see when looking down from the top of the camera. The reason I did this is because leaving the cap on and turning on the camera can cause ware on the cameras motor. I know that it is supposed to "pop off" if you accidentally leave it on, BUT I would rather not do it and risk damage to my camera.

I’ve been using Sony’s original case for my rx100vii, it’s good but annoying when it comes to battery replacement in addition when I want to use it takes some time so for special moment you will miss it! I found this by chance & recommend by another purchaser, I bought it with little doubt, as I faced problem with my previous rx100ii, rx100iv and rx100v with lens cover as it dents with any minimal pressure even when it was in my pocket . This lens cover has completed the perfect set up for my camera: bottom grip holder(with battery opening), belt holster and the lens protection.

After using this metal lens cap, I feel like I rather have it in plastic than the metal. I keep dropping the lens cap and it now has so many damages. In terms of quality, it is good and nice to the touch and have some weights to it, but like I said plastic version would done the same job with and still looks nice and wouldn’t create ding or scratches if you drop it.

The camera does not sit flat with the lens cap on. Otherwise, it’s high quality, stays on well and comes off fast!

Good

The lens cap a not meant for gr2 or gr3. If is loose fitting.

Protege muy bien la cámara, no se enrosca, es más como de succión, entonces está perfecto y además me gusta mucho que dice GR. He leído en varios lados que la RICOH sufre de polvo en el lente, pero desconozco si esto aumenta o disminuye el riesgo de que eso suceda, hasta el momento todo bien. De igual forma planeo comprar un adaptador para lentes de 49mm y ponerle un filtro UV o ND para que proteja el lente por defecto sin tener que dejarlo expuesto en ningún momento.

Perfect for protecting the lens when the Ricoh GR is turned off. Good friction fit to the camera's body ring. Tension loosens slightly over time. Be careful when new to not turn on the camera with cap on as lens pushes against the cap and get stuck. After some time the lens is able to push off the cap, but best not to put too much pressure on lens. Able to fit the JJC filter adapter with filter as well, though doesn't feel quite as tight.

GRのレンズ回りを保護するアルミ素材のかぶせカバーです。 手持ちのGR IIIxに取り付けました。 外側は黒のアルミ素材です。 GRはロゴマークとフォントが異なりますが、アクセサリーとして雰囲気がそろっているので良いと思います。 内側は周りが起毛素材になっています。 最初のかぶせはかなりきつく、内側の起毛部分がフィットしてくると付け外ししやすくなります。 ただし、回すとリングと一緒に外れてしまうので、真っ直ぐに付け外しする必要がある点に注意が必要です。 また、付けた状態で電源を入れるとレンズを出せずに「レンズが異常です。」とエラーが表示されて電源が切れます。電源ボタンも触らないようにしましょう。 GRのリングがボディいっぱいまであるため、本品を付けると平置きすできないのはしょうがないですね。 撮影時にはGRの最大の特徴とも言える速写性を損なうため外しておくことをおすすめします。 収納時に沈胴するレンズ回りを保護するのに良いと思います。