Temperature Activated Thermochromic Color Changing Pigment Black Changing to COLORLESS at 77F/25C Perfect for Color Changing Slime Secret Message Reveals

This RED-YELLOW pigment works well for slime. The temperature of just your hands is enough to initiate the colour change from coral to orangey-yellow and yellow. If you use a cold jell pack on it you can change the colour from a coral to a deeper red. The visual effects were really good and the children enjoyed playing with the slime to make the colour change.Easy to blend into the glue when mixing. But expensive if you are just making slime at home, as one 10g jar can make one bigger batch of slime (2 bottles of 4oz of glue) or two smaller batches of slime (1 bottle of 4oz glue each batch). Great for school STEAM activities though, as schools would have an expense budget. The recipe I used was as follows: 1 4oz bottle white glue, 1/2 to 1 teaspoon baking soda, 2 teaspoons contact lense solution.The BLACK-PINK product wasn't good. The colour when mixed with white glue is dark purple. It doesn't seem to change colours with the heat of your hands when handled. Did not get it to go pink at all, perhaps it needs a stronger heat source? It changes to black when an ice pack is applied. Not a great visual as the disparity between the dark purple and the black is not great. Wouldn't recommend.

The media could not be loaded. I've bought the Yellow-Red @59, Red-Yellow @77, Black-Clear @77, Black-Pink @88, Red-Clear @88 and tried almost all of them. My first attempt was to put Red-Clear @88 and Black-Clear @77 in some big box epoxy and inject it into a ring mold... that worked great and the color is super red. Two things I immediately discovered: 1) You can't expect a powder pigment to turn crystal clear. It turns translucent/opaque white. I don't know why I expected a powder to disappear 😅. 2) Finger 'body' temperature is WAY below 88F in the winter... so only the Black-Clear 'kicks' and only a little... In the summer I'm certain to have the perfect disappearing ring.Once I got an idea of how it mixed and reacted to the epoxy I went full in on a new project. I poured some TotalBoat epoxy in a knife handle blade to 90% full, let it kick for a bit, then mixed in Red-Clear @88 and drizzled it on top. I was totally blown away. It looks amazing... the red is so vibrant. I just eyeballed the amount to use and it came out great.Last I had a rainy Sunday project with my daughter. we poured some top coat nail polish into a cup and mixed in some pigments and did different nails. Then top-coated them in clear. The best temperature reaction I think is the Yellow-Red @59. Super fun and she loved the process. And according to their instructions, while you shouldn't eat the stuff, it is safe to handle.This stuff is awesome and I'm working on ways to incorporate all the color/temp combos in my work. It's going to be great to have different dimensions of effect that 'kick' at varying temperatures. Just need a truly-clear transparent! 🤣 But instead of that I'd do with a Red-Clear @77... ooooh.. or Clear-Red@77! SCIENCE MAKE IT HAPPEN!

I have been doing my own nails for a few years now and tend to lean towards the dip powders that change color with the temperature. After I came across a video of someone making their own powder I wanted to give it a shot. I took a chance with this product and mixed it with clear dip powder, after a couple experimental fake nails I got the consistency I wanted. This product went above my expectations and was a lot easier to use than I anticipated.

At room temp this is not black powder. Works for my application though. Will do some more testing and check at different temps.Update what you mix this with is critical. When it’s wet it’s grey, it’s wet when in power. Tried it with some cyanoacrylate and it took a long time to set. Now it’s back. I had to take the temp up and get the change to occur before it started acting as advertised. Having said this superglue is a fairly harsh chemical that does not meet the specifications on the instructions well. Expect to do some playing around to get the concentration right. But this is a really cool product.

This stuff is great. Tried other brands and this one is far superior.

Tested the product about two weeks after buying it and it seemed fine.I had intended to repair a color changing mug I got at a Magic Castle Conjurers cruise that had accidentally got chips and dings.Having never dealt with ceramic cups before, I consulted people on how to repair chips before using this product on the mug.Over time the powder turned greyish purple and no longer retained the black it originally had and became useless in the covering the black mug.

Very interesting product with a myriad of uses. Silk screening t-shirts, school projects, arts and crafts, temperature sensor, pranks, etc. The product is opaque in use, so if you're looking for translucence in your finished product, this probably isn't for you. One thing to pay special attention to is the activation temperature regarding your particular use for the product. You don't want it too low where it's always activated or too high where it never changes. Once you've got that figured out, the sky is the limit.

So impressed with this product I may even do a podcast about it!!! I love my nails and I love color change polish. Recently I have started creating my own buying the powder and adding it to white or clear bases. I love this easy to integrate into polish just dab polish brush into powder and add to container I use about 1/2 g for a really good change per bottle of polish. Can't wait to buy the other colors!!! Great product great price 10g make about 20 bottles of polish..so do the math great price great product and you can add to paint and glue and modge podge and home made slime non toxic but wear a mask always when working with powders 🥰😜