Skin for Life Oxygen Infusion Facial Spray Gun / Double Action Gravity Feed Airbrush Sprayer (0.3mm)

Description

How to Spray: Fill the cup with desired fluid. Hold the gun lightly in your hand. By pushing down on the trigger the air valve is opened. Pulling back on the trigger allows material from the cup to flow. The trigger is pushed and pulled at the same time to operate. To Stop Flow: Push the trigger forward and remove finger from trigger. The spray pattern is in accordance with the distance between a work surface and the airbrush gun nozzle. Maintenance of Oxygen Gun: The oxygen gun should be cleaned after every use to avoid clogging. Fill the airbrush cup 1/4 full with an O2 cleaner or solvent used for airbrush guns (not included), and spray directly into gauze or towel letting the tip of the gun touch the gauze or towel, spray until empty. Then fill the cup 1/4 full with water and spray until empty. Gun Length: approximately 6.2". Gun weight: approx. 4lbs. Operating pressure: 15 psi. Needle/Nozzle size: 0.3mm. 5cc Cup with lid. Hose specs: 5ft length, I.D. 4.0mm x O.D. 6mm, Polyurethane, maximum temperature 140oF, W.P. 180psi. Airbrush uses standard 1/8" BSP air hose fittings. Color: Silver/Chrome. Includes: Sprayer Gun, 5ft hose, Storage case for the Airbrush, and 2cc Eye Dropper/Pippette. Plastic Case Dimensions: 8.25" L x 4.5" W x 2" H approximate.