AmpliFi HD WiFi System by Ubiquiti Labs, Seamless Whole Home Wireless Internet Coverage, HD WiFi Router, 2 Mesh Points, 4 Gigabit Ethernet, 1 WAN Port, Ethernet Cable (AmpliFi HD UniBody)

This is amazing, easy to setup & connect, custom where you want extenders easily, sleek looking (we only have extenders visible in our main living areas), bumped our speeds we were seeing up from the company router, pays for itself in 2 years with our plan, happy with this

I have had many issues with my internet signal at my home due to the distance between the router and other electronic equipment that work with Wifi. The AmpliFi resolved the issue. I was about to get another internet carrier thinking having more giga would resolve it, no need to increase giga or internet prices, AmpliFi resolved this issue. Recommended, it's not cheap, but it is cheaper than paying higher internet services every month.

Let me start with the rating of the user interface. I am a network engineer. The UI is a bit too simplistic and it is limited on advanced configuration. For instance I would prefer to configure my DNS with OpenDNS as opposed to the default broadband DNS system. The UI does not permit you to change the DNS settings for the DHCP scope. If you have ever used a nest product and were satisfied with it, then you get the same feel of quality and simplicity from this product. I have not had to interact with tech support so I can accurately judge / rate that so it got a 5 star by default. The packaging: Extremely well packaged. Much like, apple, nest, beats packaging, very nice first impression The hardware: Well built and sturdy. The base is a bit smaller than a small tissue box. The mesh antennas are almost twice the size of a standard wall outlet. The antennas are connected to the 3 prong power adapter by high powered magnet. The antennas do pivot if required, which is neat. The application was easy to download and interact with. Initially it connects a default ssid automatically. The wizard walks you through configuring the system. Very simple to follow steps and if you do them right it will connect to the internet and suggest a firmware update, most likely. If you have the mesh antennas, make sure they are plugged in and connected to the base before updating firmware. I have AT&T Fiber. I just disabled my wifi on the ATT router. Plugged the Amplifi base internet port into the router switch port. After going through the wizard it was internet connected and all wireless devices were connected. I used the same SSID and WPA2 Preshared key that was configured on the ATT router. This way I didn't have to reconfigure all 20 plus devices in my home. It was that simple to install. Make sure you use the Ethernet cable that comes with Amplifi. I was using a bad cable and was getting poor performance. I have not had any performance problems at all with the device since it has been installed. This does support IPv6, Port Forwarding, Band Steering, NAT UPNP, Bridge Mode. I was only disappointed I could not adjust the DNS settings in DHCP settings

I am definitely NOT a tech savvy person, so I always approach a new Wi-fi network cautiously. I pulled the devices out and charged up the remote units and then followed the quick start guide to get the main unit up and connected to our cable modem with a cat 5 cable. The remote units synced-up after a couple of attempts and I placed those at their permanent homes. Next, we started connecting devices and this went very smoothly for all 15 or so devices for the family. Its worked flawlessly for about 3 weeks now. There are no drop spots in the house and I can pull our Sonos Move speakers all the way out to the back yard (70-80 feet from the house) and have no issues. One thing to note is that many mesh routers have issues with Sonos systems and this router was recommended by the AV expert who sold me the Sonos equipment. So far so good! Speed is really fast and even with two kids on gaming computers, we don't see any delays or glitching. Really happy with this!

Product works great, but it was not the item pictured

Easy to setup and tweet. Great coverage and looks good. Highly recommend.

We have a two story house and our Comcast modem is downstairs. Which means my office upstairs (in the opposite corner of the house) had bad internet signal and resulted in awful performance. I bought this device on a recommendation from a friend and solved all our problems. I know it’s not cheap, but worth it. With the features to protect guest access, shutting the internet off at times of the day to prevent your kids or whatever from being on internet after hours, this is a perfect device for managing internet and increasing coverage at your house. Oh. And it super easy to setup. (Easier than setting up an iPhone)

I like the Ubiquiti line of products which owns Amplifi. I thought I liked the Amplifi hardware however my connection will not get above 100M. I had all the right cables, connections, etc. Still nothing. Calling Amplifi support, they determined an RMA is to happen. They then came back and said the device is no longer covered since it was beyond the 1 yr policy. It was over by 2 months. The issue is that I called the device in under support last December 2023 but since their support is horrible, it was delayed. You call it in, 2 days later you get a response. This is their normal response time. Stinks!! I'm now out 350.00 and they are laughing their way to the bank on my dime! Be Careful