GE WB30T10133 Genuine OEM 9" Radiant Dual Surface Element for GE Electric Range

Fantastic! Saved us the expense of buying a new stove. Very easy DIY project.

We've had a radiant heat LG stove for more than 12 years. Inner burner on left side quit working one day. Not really surprising, since it was the one we use the most. The electrical terminal overheated and broke off, and the wiring connector was also a little crispy. I repaired the wiring, but the burner had to be replaced. Ordered it Friday night, and it arrived a day early on Sunday. An easy fix. This burner is the real thing, same color parts, stamped numbers, size, shape, etc. It was less expensive by far on Amazon than other parts replacement websites. I did not want a cheaper one from a brand name that is just a jumble of letters, even if it does say "upgraded." I was puzzled at first that a part for an LG stove came up as GE, but it was the exact same part number. And the first one lasted more than 12 years.

Not sure if this is actually an OEM part. Not the exact construction as replaced part. Space between 2 elements is tight and inconsistent. Support that holds temperature rod in the center of burner is a metal spring clamp. Other than the part # being different and those 2 others it works good. Heats up as fast as original. Time will tell its longevity. The heating element did not fail on my original, it was the hot light circuit that was stuck in the closed position from solder that melted from the connection right above the contacts. Too much info. Good luck on your fix.

Fit perfectly, easy to install. Too pricey, but needed it quick.

This review is for: "GE WB30T10133 Radiant Element for Stove." Amazon's service was amazing as it almost always is. The original part made by GE arrived quickly, was extremely carefully packaged and in perfect condition. I looked at some instructions online and was able to replace the burner under the induction top in just a few minutes. This purchase made the repair much more cost and time effective than calling a service person. However, it is well worth having a service person come over if you are not comfortable doing things yourself. Thought I'd share a few pointers in the hope that it helps others: 1) Make sure that you carefully go over directions, including ALL guidance that concerns SAFETY issues, because you will be working with an electrical system. This includes, but is not limited to, unplugging the burner and turning off all relevant circuit breakers before you start working on the stove. 2) Before you unhook your old burner, make sure that the new one has the same connections and make note of which connection goes where. 3) It seems that different models may have slightly different clamps/hooks that hold the burner close to the under side of the glass cooking surface. Mine were a bit tricky to remove. Just note that if installed correctly, there is a small spike on the clamp that goes into a small hole on the burner. You need to disengage that spike before you can take the old burner off. 4) The insulation and element of the burner appear to be extremely delicate. Handle with care, so that your new burner does not die before it has a chance to produce heat and light! 5) Be careful not to tear or disrupt the thick layer of insulation material that sits under all the burners. That's easy to do if you're not paying attention. I'll revise this review if needed, or if I remember something that I did that I have not included here. Overall, this repair was easier and faster than I'd imagined. I hope that you safely have the same experience as I did. All the best!

Got this for my 4-yr old GE JB650STSS Range to fix the following scenario: Front-left burner stopped working with hot-surface light on 24/7 even w/ a cool surface. Switch light turns on but burner refuses to turn on. Short-story: this part came quick and packaged really well and most importantly, it works! Long-story: I'm a typical guy who has never serviced a range before, but I've done minor handy work around the house. If you're not confident in doing this, hire license people to do this. First off, I had to figure out whether its the switch or the burner itself that was broken. In mine's a burnt spot was visible in my burner right at the end of the metal rod and below coils. Before you check anything, turn off range breaker and pull plug. Electrical range electrocution may be fatal! To check the burner, you will need to unscrew 2 screws on the front right above the oven door. From there you can open the oven much like opening a car hood and see the burner backs. The front-left burner is attached to the glass surface via 2 metal hinges. Unplug the wires first and then use a needle-nose pliers to unhinge the burner. The hinges are a little tricky but if you examine them you will notice there's a little nub that locks the hinge to the burner's frame-holes. Pull against the nub to unhook first and then it should slide off easy. Once the burner is off, check for signs of black burns. You can also check continuity/ohms via multi meter. Hot-surface light is controlled individually by the burners and not the switch for this range. To check the switch, you will need to unscrew a few screws in the back to access the switches. You will also need a multi-meter to measure the continuity/ohms of the switch when its in the off and then the on positions. For instructions on how to use a multi-meter on the switch, refer to YouTube as I'm no expert (or beginner for that matter!) in this unfortunately. You can also open the switch to check for any burns.

This burner went out after just over three months! I had ordered an off brand and it only lasted five weeks, so I figured I'll get an OEM part.... Well, it lasted about three times as long but what a joke. Where's can you get quality parts these days????

La pieza venía toda quebrada

OEM product, fit right in and works great

That’s was the perfect piece for my oven. Very easy to install and save lots of $$ to do it myself. Work well.

GE OEM part, fit perfect without any modification. Saved me from buying a new range.

shipped on time and worked perfectly.