Gear Puller Remover Professional Tool Universal Motor Pinion for Rc Motors Accessory

Worked great. didnt have any issues, just took my time and worked it slow so that there were no damages to parts or the tool

I believe this is what one calls a "disposable" gear puller. It pulled one gear successfully. When I tried the second, the piece actually contacting the motor shaft started to bend as well as the aluminum frame of the gear puller. I do not recommend this one at all. It finally broke and is now in the trash.

Pulled the 2 pinions back to back no issue

It's made really good, it looks like it works well too. All my rc vehicles are 7th scale or bigger so it doesn't work for me.My pinion gears are bigger than this puller. Not good for anything larger than 1/10 scale

I bought this to remove a stuck gear from a 3D printer stepper motor. It did end up working, but the foot was just slightly too thick to get under the gear at first. I had to do the screwdriver method in order to make a big enough gap to get the puller in.After that, no complaints.

going back tomorrow this is junk bent using the first time .. subpar aluminum I guess

The media could not be loaded.  This did what I need it to do - pulled a pinion gear off of a motor. Held the main blue part with an adjustable wrench and the used a pliers to grab the screw handle to get some additional leverage.

Had to throw it away. Worked on the first 2 pinions with some heat added pre pulling. Noticed the metal was starting to collapse/fold. On the 3rd pinion the bottom platform cracked at the base. I continued to see what was going to happen next as the device is now broken. The crack turned into an opening and I was unable to remove the gear. I Ordered a higher quality and more expensive product with 0 issues to report after 9 pinion gears.

Pas assez solide pour enlever la poulie d'un nema17. Mais peut-être pratique pour autre choses.