SnozzlePro Universal Hair Dryer Attachment Adapter for Concentrator Nozzles - Patented No-Slip Design Fits Most Nozzle Diameters 1.5”- 2.25”

The photo makes it seems as if the openings on each end are equal size, but one is slightly smaller than the other. The measurements are given for accuracy and to save you aggravation and waste, so be sure to use them and measure your devices before ordering. I ordered it at the same time as my diffuser... I bought this because I wanted to use the black orchid diffuser with my ancient Conair Ion Shine 1875, and I was worried it wouldn't fit. Turns out the opening to my dryer is so large the black orchid diffuser fits INTO the hair dryer opening -- all I have to do is press very firmly and it fits into place without popping out. I will use the snozzlepro for other dryer attachments now... I thought about returning the snozzlepro, but then thought I should try popping it onto the end of my Revlon One Step, which I occasionally try to use on the cool setting. If you have a Revlon One Step, you know there are at least four major problems with it. One of them is that some of your hair gets caught in the rim underneath the upper cap/handhold as you turn it, and you either rip the hairs out of your head without realizing, or you have to stop and try to pry the hairs out. I thought the wide end of the snozzlepro might stretch to fit over that rim, to protect my hair from getting caught in it. (Turns out it's a little too small for that and keeps popping off, but the snozzlepro manufacturer was very sweet and tried to help me make it work, even though it is not intended for that purpose.) [In case you're curious about the other problems with the Revlon One Step -- the heat is too high, the bristles grab your hair to the point of causing breakage, and the sound is so loud you should use earplugs. I'm going to stop using it.]

I got this to help me attach my Black Orchid Diffuser to my Babyliss Portofino Dryer. It works great, but it will eventually fall off if I have to dry for a long time - it gets loose with the heat. It doesn’t fall off every time, but I make sure it is secure before drying. It takes forever to dry my hair, so I need to check it occasionally to make sure it is still secure. The diffuser does not stay put at all without this attachment, so definitely need it! UPDATE: I received a message from Val, the inventor of SnozzlePro - she gave me a tip that helped a lot. I had the nozzle upside down. When I turned it around the way she said to put it, it fit better and did not come off! Changed to 5 stars! Thanks Val!

I have an Infinitipro from conair, you know the one. The one with the big irreplaceable bowl style diffuser that snaps into the front and doesnt seem like it will be the sturdiest for long term use with the massive seams down the sides and the quickly widening barrel? Yeah, that one. Well I was sure i was never going to be able to find a workable back up diffuser to fit this beast, what with its funky shaped barrel, least of all get lucky enough to get a replacement that's as big and wonderful as the diffuser the dryer came with, but I managed it. I just am in aww of how fabulously it holds it in place, theres no movement at all when I shake it while attached to my dryer! The so called matching diffuser that came with the dryer is constantly popping off, way worse than this guy who wasnt even meant to go on it does! But when I paired the matching one up with the snozzle pushed as far down the barrel as it goes, it provides enough stability to keep even that diffuser in place, no more popping off! Now I have two great diffuser attachments, thanks to this one little miracle device! This thing is worth every bit of what I paid for it, I wish I'd known about it sooner as it would have made all these weeks using my conair diffuser so much more enjoyable. I only hope it's as great in action, as it is at attaching things. I will update my review once I've got to take it on its maiden voyage. Update: this thing gets to heating up and then suddenly it's too floppy to hold the diffuser into place. I've tried moving it up, and then further down to try to find the best position to get it to hold on, but nothing seems to work. I will keep playing around with it as I use it more, to see if I can get it to work right, but as of now its about as useful as my old diffuser so I will be removing a star.

I bought this snozzle as it was advertised to work with the Xtava Black Orchid diffuser, which I was struggling to keep attached to my BaBylissPRO Nano Titanium hairdryer. With the snozzle, I find that the diffuser only falls off 1-2 times per drying session, which is an improvement over the 5+ times it falls off without the snozzle. This is an improvement and I will be keeping the product, but it is still not exactly what I was hoping for as this product is advertised as being compatible with the Black Orchid.

I wanted to love this so much! The owner of the brand sent a handwritten thank you note with my order, which was so lovely. It’s a wonderful idea in theory, but not so much in execution. I bought this to attach my Black Orchid diffuser to my John Frieda dryer. It fits on the Black Orchid, I’ll give it that much, but unfortunately, it doesn’t fit on any of the other diffuser attachments in my arsenal. I would overlook that if it worked with just the Black Orchid, but it fell off my dryer every couple of minutes when I tried to use it, and I had to use my hand like duct tape to keep it in place, which truly defeats the point. The second time I tried to use it, I had the same experience of it repeatedly falling off my dryer, so I tried attaching it to my teensy little travel dryer, and it fit! I guess I’ll use this if I ever want to use the Black Orchid with my mini travel dryer, but I’ll probably just bite the bullet and buy the Xtavia dryer, since this thing was such a waste of time and money. Sad Panda.

I did tonnes of research before buying one of these and had such high hopes, but have been pretty disappointed to be honest. I have a black orchid diffuser and both a Dyson air wrap and Lable M professional hair dryer, which I wanted to use this tool to attach the diffuser to. It does hold the bits attached, to an extent. I usually have to reattach all the bits about 3-4 times each time I dry my hair, which takes me 15-20mins, which I find frustrating. It also gets very hot, which makes reassembling a pain. But it gives me flexibility over resorting to gaffer tape…

I have a parlux dryer and the nozzle kept falling off and I was using tape to keep it on, which is terrible. This is great, it still allows me to take off the concentrator easily so I can switch to my diffuser with ease. I have no problem with it sliding off, it's quite sturdy, handles blowouts, not bulky at all, great for stylists!!

It works great. Now I can use my favourite diffuser on most hairdryers.

A bit hard to put on but it does work as advertised. Used it on the multiple dryers with success.

Doesn't hold the diffuser securely, continuously falls off. Cheaper to buy a new blowdryer!