ZOTTIShower Attachment | Diverter Valve for Bath Taps | Add Shower to Bath | 28mm / 24mm Diverter | Chrome M22 X M24/M28

The media could not be loaded. Fit my bathroom tap okay and works perfectly. It was an easy fix and gives a neat look.Overall, happy with purchase. Will recommend.

Great! Works! Easy to fit, has spare adaptors and washers for diffrent size pipes.Our electric shower died so had to find another solution. This is it.Looks good, took 10 mins to fit and after I descaled the shower head we now have far better water pressure than the electric shower ever had. (Running off unvented cylinder now).It's only day one so I will update if there are any problems down the line.If you have decent bath tap pressure already you'll have a great shower too.EDIT: 5 months down the line and still working great with no leaks. Very happy.The fitting also rotates nicely so shower and adapter are never in the way.Tiny down side, as others have said it does take longer to fill the bath now. I have also noticed that our old bath taps are slightly leaking now, when I run the bath. Posibly due to the increased pressure they are under now. But they were old taps already so not surprising, and its a tiny leak into the bath.

Once installed, it blends in so well it looks like it was part of the faucet. You can rotate the adapter freely, so you can move the shower cord and valve head out of the way when you take a bath, or have them easy to reach when taking a shower. I really like how I could choose my own cord and shower head, unlike everything else I looked at. The shower/bath control valve is good quality - feels sturdy and operates very easily. I used one of the included thread adapters and the rubber washers, secured everything hand tight, and it all worked without a single drip of leakage. Awesome product!

A good product, I used the larger adapter to fix it to my bath tap. Unfortunately, my tap doesn’t have a sealing surface inside the spout, so the supplied seal didn’t work. See photo of tap spout! This is no reflection on the product which is good but check your tap first!I used ptfe plumbing tape to seal the adaptor to the tap and that worked!The only downside to this method of sealing is that I needed about 10 layers of tape which made it difficult to engage the thread! Once done tho’ I am happy with the results!Top tip: I found the best way of regulating the water temp is to adjust it to about 40C on the combi boiler and just use the hot tap thus avoiding any temperature or pressure fluctuations. Product seems good quality and robust; it doesn’t leak.The water flow when using the tap to fill the bath is more restricted than before, but we won’t be running a bath any time soon!

Our electric shower broke down (just out of warranty) and we bought this to connect the mixer bath tap to the shower hose as a stop gap. It works absolutely perfectly. It fits tightly with no leakage and was very easy to install. The little flip switch means that it is easy to switch between using as shower or tap. We have not replaced the electric shower and are now just using this because the pressure is good and it works perfectly - much cheaper and more efficient than a new shower!

Delivered less than 24 hours after order. Good quality fitting, however was missing one of the step down rings, the one I needed. Probably fell out of package in the warehouse which had a split on the side of it. Contacted the supplier, Zotti, via Amazon options. No reply and now 5 days later, so unlikely that there will ever be one. Very poor customer service from Zotti. Ended up having to buy a separate step down ring to complete the job. Not likely to purchase from Zotti again.

Works great, got this to mount when needed on my kitchen tap so I can wash my dog in the rear garden. Got a long hose, attached to this and got it out the window, no issues.Haven't noticed any leaks, easy to install/remove as needed.

Good product