Marcy Weight Storage Organizer Racks for Dumbbells, Kettlebells, Weight Plates

First, I bought this based on the numerous reviews written. The majority of the reviews were good and there's always a chance that you'll get one that passed QC, yet may be defective. However, the number of positive reviews way outweighs the negative. Assembly: (5/5) This thing was pretty simple to put together. There are six rails, 2 for each row, that requires one bolt for each side. So after 12 bolts, I was pretty much done. Like all assembly, don't tighten completely until you have all the bolts on first. Build: (5/5) This thing is solid and pretty heavy. I did not notice any flexing or bending even as I moved it around and leaned against it. So far I only have a few light weights, but plan on getting some 40-50 lbs dumbbell, which I am sure it will comfortably handle. I think it may be a good idea to rack the heavier weights on the bottom. Had no defects on my unit. No missing holes, cracks, or damages. Functional: (5/5) The rack is designed to hold the dumbbells in place, but not to prevent them from rolling left or right. The assumption here is that you will be racking hex shaped dumbbells and not round ones. It's not like the gym rack where there is a crescent shape rubber piece to hold the weight in place. They did it this way, so you can rack more weights if the dumbbells are lighter. The rack spacing is a little narrow, so it loosely fits my Weider Rubber hex dumbbell. That means this will probably accommodate smaller neoprene dumbbells that are a bit more narrow. Finally, it's great to have each row spaced back as you go up. This makes it easy to pick up weights from the bottom rack with ease. Since I have heavier weights on the bottom, the last thing I want is contorting my wrist to get the dumbbell out. The top row is not offset too far back where you'll have to reach over to get it. Overall:: (5/5) Item was decently protected by a layer of bubble wrap and one Styrofoam pad in the package. Easy to assemble. Looks good and functions as intended. This thing makes accessing the dumbbells quicker now that they are organized.

Excellent, I'm very satisfied with this dumbbells rack. It's easy to grab and put weights away. I did put the front rails on upside-down. The back rails hold the weights perfectly 8-50lbs. I bought 2 racks and love the convenience, comfort and organization. I highly recommend purchasing these Rack. There solid and perfect.

Solid and well built. Easy to assemble

Good purchase. Dumbbells were on the floor. The rack makes it look more organized and neat.

I don’t know if hex dumbbells have different sized heads depending on manufacturer, but mine seem larger than cast iron ones I had before. I’m specifically calling that out because my 5-50 set would not fit on the rack. I left the 5s and 10s on the floor, but the rest fit nicely. The rack footprint is small, which I needed. It’s not too long, too deep, or too high. It’s just right. It seems solid and sturdy. I worry about my bull-in-a-china-shop husband yanking the 40s or 50s off the bottom rack and pulling the whole thing over. But that’s more on him than on the rack. The rack came scratched in places. The bolt heads scratched just from them rubbing together in my hands. It’s in the garage and it will get scratched from me taking and replacing the dumbbells. I don’t care about a couple surface scratches. Installation was very easy. The manufacturer must have changed the hardware. I base this on two observations: 1) There were no wrenches in my box. Some reviews complained about how crappy the included wrenches were. 2) The instructions didn’t match the hardware. For example, the instructions said two wrenches would be necessary to tighten the nut, but the nuts are nylon nuts and the bolts have a smooth top, so there’s nothing to grip with a second wrench. You only need one wrench to tighten the nuts. I used a 5/8” socket. To be honest, I regret using the socket because I was able to collapse the metal under the nut, despite using a washer. Doing so deformed one of the plastic end caps. That’s why I deducted a star. The metal shouldn’t be that soft. Let me address a complaint I read in other reviews regarding the crossmembers not matching the holes in the side braces. Install all the bolts and nuts only finger tight. It allows you the slack to make the holes line up perfectly. After doing that, square up the rack and begin fully tightening the nuts. Tighten the opposite nuts - so do one on the top right then on the bottom left. Then top left and bottom right. Then the middle. You should do this with most DIY builds, unless the instructions specifically state otherwise.

Came in many pieces but took a short time to put together. Instructions was clear and had no issues. Came out great and was able to support small and large dumbbells. My heaviest was a pair of 60lbs. No issues and looks great.

Resistente

Calidad precio perfecto

Funkar väldigt bra, inte rackig eller skallrig, känns väldigt gedigen och stabil.

Sturdy and exactly what I needed

Very strong and sturdy stand.. Great quality..