AR-PRO 11x4.00-5|11x4.50-5|11x6.00-5 Heavy Duty Replacement Inner Tube with TR-87 Bent Valve Stem (2-Pack) - for Wheelbarrows, Mowers, Hand Trucks and More

The product arrived quickly and as expected. Overall quality seem good. The valve stem is offset from the center, as in the picture I appreciate that! I did struggle quite a bit replacing this tube. I do not feel it was any issue with this product, moreover, an issue with the quality of the rim. I overloaded my original tire and had to draw horizontally and it poped this also caused significant damage to the rim. I repaired the rim and when this tube arrived I struggled installing it. The valve stem pulled in when seating tire bead, againwhen filling. I ended up using a flat washer and a wire tie to keep it in place. ( I would highly recommend this). This was no fault of the tube or the product more an issue with my rim. I have replaced many tires, tubes and all sorts of vehicles, cars, trailers, atvs, BMX. I struggle with this replacement due to the rim and tire. I did make this repair and able to use the dump cart, but also ordered, a no flat wheel assembly, to install later. Overall this product performaned as it should, and would recommend, but only if you have a quality rim!

Worked well, good fit

Nothing really to say! It installed nicely and held air. Tube looked to be of good quality and still is in use today. Good buy

The size I bought is 20 x 8.00/10.00 I only gave these 4 stars because I haven't had them on the rims long enough to write about durability. I may come back later to update this review. The tubes I received are MUCH thicker rubber than those I have gotten before, and I was not expecting that in this price range (2/$30.00) I'm not complaining, as I often get thorn punctures, and then have to add liquid tube sealant-maybe these will better resist punctures. These also have the full length threaded metal stem with washer and nut retention-which I was looking for to better protect against rim cutting of the stems when/if a tire loses a lot of air and the tire gets loose enough to begin to push the tube around. I try to use tubes in any lawn and garden wheels originally equipped with tubeless rims, and I have to say that these, being thicker, were tougher to install. I ended up using talcum powder inside the tire and on the tube-something I have not had to do with these smaller diameter units. A couple tips tip to anyone out there who hasn't installed one of these smaller diameter tubes and/or tires before and wants to try it. Once the tire is off the rim completely or on one side (for installing a tube) take a good look at he inner surface of the rim. If the rim shows any sign of serious rust inside, do yourself a BIG favor, take the tire off and sand the rust smooth and AT LEAST spray it with primer, or the rust-(which will continue to grow), has a good chance of puncturing the tube eventually-or rusting through the rim. There may also be some very sharp factory artifacts from welding-(they often let things like this pass inspection if a rim is destined for use with tubeless tires). A rusting rim often makes a pinhole, or raises a tire bead just enough to cause an air leak-or can abrade a valve stem. If you don't have the proper tools to break a tire loose from the rim and install a new one-get them. Its very easy to directly damage a rim (or a tire OR A tube) by using substitute tools that have sharp edges-and also by raising burrs that may snag the tube you are going to install. Speaking of tubes, there is an inexpensive tool that screws onto to the end of the tube's valve stem to help thread it through the rim hole-(something that is much harder to do with big hands. big fingers and tiny tires and tubes). If you don't have one of those you can sometimes substitute a valve stem extender to make it easier to find and steer the valve towards the rim hole.

So far so good. Had to take to a tire shop for install. Beware of tire shops that say the valve stem will be at a bad angle. Simply not true. Inflated slightly and the valve stem lined right up. It was a good value that it was a two pack.

They are inner tubes that work.

Quick delivery and priced right thanks

Seller please respond before I give my review The valve stem caps cut into both tubes due to how they were folded in packaging. I would think they were pressed pretty firmly together somewhere along the way. The shipping box was not damaged One valve stem separated from the tube body. I needed to fix my lawn tractor tire so I installed the one with the good valve stem. Even though the installed tube did not leak, I can’t help but think that circular cut is a weak spot. Would it be possible to get at least one replacement sent? Look at photos showing when folded the valve cap lines up with the circular cut mark. Aside from that, the rubber looks thick and the tubes seem like they would be a very good value for the money. Just need more care in packaging.

My Cub Cadet zero turn front tyre kept coming off the rim. So put this tyre in it and boom! Fixed. Thank you.

Buena relación calidad precio.

Awesome.

doing what they do holding in the air

Great heavy duty quality. Pleasantly surprised by the quality and how affordable they were.