H&A Motorsports H6054 7"x6" Chrome Housing Diamond Cut Headlights Replacement Glass H4 7x6

And bright. I swapped the bulbs for Osram Night breaker H4 bulbs but these work far better than the led lights i had previously that blinded me when it was snowing and others in regular weather. High beam lights up the road further nicely. Currently say unavailable so i hope they come back soon since I'd like another set to retrofit I had to cut the rubber cap where the bulb prongs sit so the plug was attached better, and the breather or drain tubes to fit in my headlight housing. Might not have to but my 93 GMC Sonoma did not want to sit flush in the housing without doing that. Definitely feels high quality and the black housing is a nice touch. Will buy again if they're available Put clear 3m tape or film over the housing. The glass seems thin and didn't stand up well against a random rock the other night but the light still works great! Purchasing again so i can retrofit it

I put these glass housings on my food truck to replace the old sealed beam style lights. i was going to go with a full LED replacement, but all i could find were cheap plastic lenses that would definitely scratch and fade over time. These lenses were not only very affordable, but also easy to install, and look great. only drawback is one of the reflectors inside was a little bent, possibly due to shipping, but was easy to reach in and bend it back into place. the lamps came with H4 halogens installed, but i ended up getting LED H4s. kept the halogens for a replacement on the road if needed though. overall, an awesome find, and i know these will last for years without worry.

Product: H6054 7"x6" Chrome Housing Diamond Cut Headlights Replacement Glass H4 " 7x6 (~$40) The good: Decent cut-off of light for oncoming traffic, provides a nice sideways 'Z' shaped shadow. Allows retrofitting H4 size LEDs. Rubber gasket to seal out bugs and water. The bad: rubber gasket is difficult to install. Trick is to turn it inside-out, then push it over the bulb base, then install the bulb and push gasket over the big housing. Be careful not to get finger-oil on bulb! Wear clean gloves like nitrile. Great retrofits to modernize lighting on old sealed-beam halogen vehicles and good value.

Good quality look great for the price only slight fitment issue. I swapped the included halogen bulbs for LEDs too!

Pretty decent quality headlights for the money. They are actually made of glass and are pretty sturdy. They were a great replacement for the sealed beams that came in my car. Pair them with some led bulbs from Amazon and the visibility is great for under a hundred bucks.

Missing the turn indicator bulb or small bulb socket shown in several photos. The center reflector comes slightly bent easy to bend back with a screwdriver, with little support so they shake easily im betting they will vibrate off in time. The glass front looks good. The rubber back is not stretchy so it doesn't seal very well. Other than that I'll try to make them work.

these fit my 1985 pontiac fiero and look stock. these are a glass front and plastic body easy bulb replacement. i have had these on for a while and i have not had any problems with them working or leaking

Good replacement for a little bit better light than stock. Uses h4 bulb so it’s easy to find and or upgrade the bulbs that come with it.