HOMEDEC 2inch Brass Shower Body Sprayer Jets Shower Head, Valve Needed (6pcs, Square-Chrome)

These are really nice, easy to install, I did order larger covers (trim) pieces from Amazon to assure proper covering of pipe

These body sprays are excellent quality. They’re built from solid brass and have a substantial weight to them. One thing about installation it buy a set of internal wrenches. If you try to use vice grips on the outside of the connections, you will damage the threads. They conveniently have a three pack of the husky wrenches at Home Depot and they work perfectly to get a solid tight connection.

Work great and are heavy duty, not cheap or tacky looking. This was a good purchase!

1. It is true, the escutcheon plate cannot go past (or over) the collar. So, unless your measurements are dead on, you will see the threads. The escutcheon plate is stainless steel, so drilling it out with a unibit or similar will not work. Solution - I used an knockout punch (typically used in electrical work) to increase the size of the hole so the body of the fixture could fit through it, hiding the threads. 2. The brass nipple that comes with the fixture is removable. There is a rubber seat washer\screen in the fixture and you can use a standard 1/2 NPT nipple. NOTE: Unless you punch out the escutcheon plate, it will not fit over a standard NPT nipple. Overall, very happy, they look great and a good value. The knockout punch cost about $30.

These jets are wonderful! Adjust easily & allow and ample amount of water to spray!

Very easy to install and what a difference by far a wonderful body jet. The price was amazing for 4 jets.

Escutcheon plates only fit over the pipe nipple, making installation more difficult as there is little room for variance. Comes with 1.125" brass nipples with a internal hex. One of my escutcheon plates was differently sized than the others.

I liked the first six body jets so much I bought 6 more. I had a small issue so I emailed them, they responded the same day and resolved my issue fast and even checked in with me to make sure all was good. I strongly recommend the product and seller, I will be using them again. There is a rubber washer and a rubber insert in between the brass threads and the swivel that will compress a little when installing. I made my own rough in hardware so I could set the right depth.

The 1/2" unc thread only allows about 1/2" of space from the drop ear elbow and the wall board alone is 1/2" thick, much less the tile, so I used m-f brass adapters to make it easier.

Exactly as advertised

trop de jets plus de pression