I want to run the led around the whole room, so i need about 65ft, i want it to have a chasing pattern, what do i do, what parts do i need to buy?

First thing I would do is calculate how many LEDs are in your 65 feet length and multiple that number by .06 to establish the maximum current required for your power source. Next do you want to program the lights yourself or do you want pre written selectable patterns? Programmable is hardest method and I have no experience with any of them. Selectable patterns are usually written with a couple of hundred patterns to choose from. I've had great success withhttps://smile.amazon.com/dp/B07FDW1VZB/ref=cm_sw_r_cp_apa_glt_fabc_WJZCRHYWHS60F9Q7377T Your power supply can be from five (5) volts to twenty four (24) volts and there will not be a need to buy a separate power supply for your lights and controller. Best of luck on your project.

What are the 2 loose wires for? Are they just a secondary conection for power?

From a google search I found this image( https://a.pololu-files.com/picture/0J4995.1200.jpg ) which shows the Arduino using signal and ground on the 3-wire connector and external power supply connected to the two "loose wires". So I would think that for a short section/small number of LEDs it could be powered directly from the 3-wire connections. But if a long string of LEDs is going to be used, lots of current/power is needed and connecting to a beefy power supply would be requires so the loose wires can be used for that.

I want to run 4 -16.4 feet strips together , can i use the bluetooth sp611e sync music controller instead of the sp601e controller ????

there are two output , each output port can control max 600LED

I bought a ws2812 led strip but what else do i need to use it?

At the very least you need a +5V DC power supply and a data signal. That could be from a Raspberry Pi or an Arduino. There are tons of tutorials on the web on how to drive a WS2812.

Color	Black Pcb Ip30
Brand	BTF-LIGHTING
Indoor/Outdoor Usage	Outdoor
Special Feature	Cuttable, DC5V, DIY Project, Individually Addressable, Support Lots of Controllers
Light Source Type	LED
Power Source	DC5V Power supply
Light Color	RGB
Theme	Music
Occasion	Christmas, Wedding
Style	Modern
Material	FPCB
Controller Type	app
Number of Light Sources	150
Voltage	5 Volts
Wattage	45 watts
Included Components	3 PIN male connector
Item Weight	0.05 Kilograms
Number of Items	1
Item dimensions L x W x H	5.91 x 3.94 x 0.59 inches
Control Method	App, Voice
Water Resistance Level	Water Resistant
UPC	682601002203 602938067744
Manufacturer	BTF-LIGHTING Technology Co., Limited
Part Number	WS2812B5M30LB30
Item Weight	1.76 ounces
Product Dimensions	5.91 x 3.94 x 0.59 inches
Item model number	WS2812B5M30LB30
Is Discontinued By Manufacturer	No
Area Lighting Classification	IP30
Assembled Height	1.5 centimeters
Assembled Length	15 centimeters
Assembled Width	10 centimeters
Shape	LED Strip
Specific Uses	Indoor use only
Special Features	Cuttable, DC5V, DIY Project, Individually Addressable, Support Lots of Controllers
Shade Material	Metal+PCB+Plastic
Light Direction	DC5V Power Supply+Controller
Switch Style	Controller
Batteries Included?	No
Batteries Required?	No
Wattage	45 Watts

BTF-LIGHTINGWS2812B RGB 5050SMD Individual Addressable 16.4FT 30Pixels/m 150Pixels Flexible Black PCB Full Color LED Pixel Strip Dream Color IP30 Non-Waterproof DC5V

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions