Thermal Grizzly - Minus Pad 8 (120x20x2.0mm) - Self-Adhesive Cooling Conductive Thermal Pad - Elastic and Adaptable Silicone Thermopad CPU/GPU/PS4/PS5/Xbox

These pads are good enough to cool down a card little more than stock pads. For 3080 you have to use 2mm on front side and 3mm on back side. Generally people don't change back side. I have also only applied on front side only. The results aren't extraordinary. I have pushed my oc and reached 102. That's the max. But I've lowered down it to 99-100 now. I was trying to test the card that's why I pushed it further. The card throws huge amount of heat, and thermal pads are very expensive. This minus pad is good enough to hold at some level. But you'll have to keep it cool. You room temperature should be cool. If you have any questions regarding this, reach out to me. Check out Computer and Mining Rig's Building (customisable) on Google! You'll find me here. I assemble computer dedicatedly, being a Mining rig doesn't change much, it's only another computer for me. Talking about temp. It actually increased outer temp for 4-5 degrees after applying this pads. But improved hashrate of 10+ MH/s. You may consider this as there are number of brands to go after. Only plenty of them to reside. 1. Thermal right extreme 2. Minus pad thermal grizzly 3. Gelid extreme Don't use gelid ultimate. Don't use thermal right ultimate Use better wk pads. Use proper size pads. Apply them properly, with measurements. Have a tutorial running in front of you while working. Be gentle with the tiny connections inside. Most importantly, if you don't apply good thermal paste (mx4) properly. Or used less than required or more than required, then also you will face bad results. Try applying in x pattern with dots. It'll work. If it doesn't give results. Reapply paste by cleaning properly. Good luck! ✌🏻

伝導率は問題ないが厚みの調整が難しく、伸ばすこともできないので勘ではなく実測を推奨 粘着力は並～弱で5回ぐらい乗せ下ろしをすると古びた付箋紙ぐらいの粘着力になる デコボコ面とツルツル面がある。サンプル画像よりは見やすいし触って判る程度に突起している

Excelente disipación de calor donde sea que lo pongas, eso si debe ser el ancho ya que si queda muy apretado puede ser contraproducente y ocasionar una falla por la presión que pueda llegar a ejercerse

Worked prefect on my msi 5700 xt evoke oc. Was getting temps in the mid to high 80°c. Now gets low 70. Perfect amount to cover all memory chips with a bit of overhang. Would need a bigger piece if you want to redo the vrms while you're at it. 10/10 would recommend.

Its ok