Schley ProductsDuramax LLY,LBZ,LMM Inject PUL (SLY-13300)

Trying to use it to pull the injector out. Tool just bent. After the third time bending it back I made a reinforcement bar. Still didn’t work. Do Not recommend

Worked great to pull 2005 Duramax injector. Actually took more time to install puller than to actually pull the injector. Very pleased with tool and now I have what I need to do the next one. After 400,000 miles I don't mind replacing injectors when needed.

Outstanding tool. I was concerned that it would not fit on injectors 7 and 8 due to clearance (A/C condenser/steering column boot), but it did perfectly (see photos). All other injectors were very easy to get to. There are other tools, they may be less complex and may even work just fine; I chose this tool because this is an expensive engine, with aluminum parts. I've seen YouTube videos of guys using a pry-bar! Invest in something a little better than that when you're working on a $12k+ engine. It is not likely I will use this tool again, but it has more than paid for itself.

The tool just bent completely before my injector even budged. I had to straighten it back out and weld reinforcement plates to the tool. My injector was however extremely stuck, under most circumstances this puller should work fine I'd believe.

Exactly as described got stuck injector out in 30 minutes. Broke the bolt because I didnt realize the injector was pretty much all the way out and put a cheater bar on it. Tool did not break just the bolt, I got another bolt from work. After I broke the tool I wiggled and turned the injector around until it came out.

Thing is junk....pulled a few injectors....(bent on one of them that coulda pulled it out easily) the bridge part of the puller should be hardened a little bit or thicker steel....wasted my time with this thing on one injector my two hands wiggling it and pulling up actually was more effective then the puller

Worked great to pull injectors out of my LLY duramax. Easy to use. Couldn’t have done it without this tool. Time saved was worth the cost ten times over

This tool is a big joke...!!!! Totally wordless,,,,,,,!!!!!!!!