303 Products (30674) Fabric Guard, 128 Fl. oz.

This product (High Tech Fabric Guard 30674) works great - 100% of the water now beads up and my cloth top looks better than new !!! My Situation: The very first time my brand new, light beige cloth convertible top got wet I realized it came from the car dealer and/or factory either untreated and/or seriously under treated because water just soaked right into the cloth as evidenced by the darker cloth color when wet. End Result: After applying two coats of this product 100% of the water beaded-up and rolled right off the top. Nothing soaked in at all - zero wet spots on the cloth top. (Since the top is a light beige color any wet spots would show up slightly darker in color.) Any water that didn't roll off the top was absorbed using The Absorber 51149 sponge-cloth available on Amazon or at WalMart. Process: 1) I gently cleaned my cloth convertible top using 303 Fabric Top Cleaner (303-30550). To do this I first rinsed the top with fresh water, then sprayed the cleaner on & gently scrubbed using a very soft brush (I used Star Brite Soft Yellow Wash Brush 040013 available on Amazon). A stiffer brush or too vigorous scrubbing could damage the fabric, scuffing the threads and creating a fuzzy look to the fabric. I cleaned the top in slightly overlapping areas about 18” x 18”. 2) I rinsed the top and allowed it to dry thoroughly. 3) Using a 2" paint brush and small container of 303 High Tech Fabric Guard 30674, I applied the Fabric Guard brushing it on in a manner similar to painting. By overlapping slightly I made certain I applied the product to every square inch of the top. 4) I allowed the top to dry several hours and applied a second coat of Fabric Guard. Notes: 1) When applying the clear Fabric Guard liquid with a 2" paint brush it will start to have a slightly white/foamy appearance - this will go away completely and the product will dry clear. 2) After each application I noticed a VERY slight, very fine clear crystalline residue on my cloth top. You had to look very closely to see it - it had just a little bit of sparkle to it in the sunlight. This brushed off quickly and easily & probably would have blown off the first time I drove the car. 3) Some reviewers seem to have issues relating to getting the product on the car itself saying it was hard to remove. I didn’t have this problem. The few times that I over-brushed or got small drops Fabric Guard on the car itself I simply gently wiped it with a soft paper towel and it didn't damage anything or leave any residual coating. It seemed to wipe off 100% with a soft paper towel. 4) READ THE LABEL !!! The first paragraph covers some surfaces that you CANNOT use this product on without causing damage. These include rubber, vinyl, clear vinyl, plastics, etc. Since the product's Material Safety Data Sheet lists the contents as Petroleum Distillates, just a wild guess but prolonged contact with this product may have a solvent effect on materials such as vinyl or plastic. 5) I wouldn't purchase 303 Fabric Cleaner again – I think a bucket of hot water with a scant squirt of Dawn dish detergent would do just as good of a job. Of course, you will need to completely rinse the top and allow it dry thoroughly before applying 303 Fabric Guard. 6) I have no idea how long my cloth top will remain water repellant after applying Fabric Guard. I plan on doing this process every 6 to 8 months or sooner if I notice any water being absorbed by the cloth top.

We apply this every year to the canvas cockpit enclosure of our boat. By sealing the fabric, we keep the cockpit dry, but also slow down the development of mold and stains on the canvas.

I’ve tried several brands of products for waterproofing. This one isn’t cheap but it works, though it smells very much like it contains the same stuff as Fabsil.

This product is nothing short of amazing! I purchased a used boat that has 2 canvas covers. The covers are in good condition but leaked a significant amount of water. This product saved my boat covers! I'm so happy I spent the money and went with this brand!!! I was considering a cheaper brand, but 2 things made me decide to order this one: the videos that others posted that showed them pouring water on the surface (that's exactly how it works!) and the fact that my local marina sells only this brand (for a whopping $168!) I didn't skimp - I first washed the entire canvas with the recommended 303 Multi-Surface Cleaner, rinsed well and dried overnight. I didn't actually use a garden sprayer. I used a heavy-duty industrial spray bottle (to control the application and the "overspray") and thoroughly sprayed it on in sections. It was a very hot, sunny day, so it dried very quickly. (I left the canvas attached to the boat for the application, so I was very careful to mask off the surfaces I didn't want sprayed!) I left it to dry overnight. The next morning, I did my water test by pouring a large jug of water over it. It worked just like the videos! The water beads up and rolls right off!!! I'm SO happy with this stuff, I've now used it on my cheap, not-waterproof outdoor patio cushions and toss pillows! The money I've saved just by not having to replace outdoor cushions would have justified the cost of this product, but it has also saved me a few thousand in replacing my boat covers! Highly recommended!

303 products are my go-to for all fabric cleaning and protection. This 303 was easy to use and when following the instructions I ended up with a stain free, high quality, beautiful restored 23 year old canvas cover. Needless to say the color did not run or stain from this product and I have full confidence the UV Protection will help keep this cover in good shape for many more years. Couldn't be happier as a new cover of this quality would cost over $4K. This cover came out looking so good my neighbors thought it was brand new.