PAUTIX COB LED Strip Lights 5V USB Powered Dotless Super Bright Dimmable LED Lights 3000K Warm White 6.56ft TV Backlights,Flexible 3M Adhesive Under Cabinet Light for Bedroom,Kitchen,Shelf Lighting

I installed these along the bottom edge of a Dell All-In-One desktop to illuminate the keyboard. Works GREAT!. Make sure to clean the surface you going to attache them to. I used alcohol, but whatever you use, make sure it doesn't harm the surface or leave any residue. The adhesive strip worked fine for me, and I've had not issues with detaching. The bottom edge of my display hard plastic. I cut the strip to about 24 inches long. The dimmer works great and I attached it to the back side of the display with double sided tape. On the lowest setting, the light is perfect for a dim/dark room and provided plenty of illumination for typing. I NEVER use the higher settings as its just overkill brightness. If you use the entire strip, make sure your USB port can provide AT LEAST 1.5 to 2 amps. Not all computers will provide this much current to the USB port, and you may get flickering. If you get flickering, its most likely NOT an issue with the lights, but an issue with the USB port not supplying enough current.

They are super sticky so they stayed pretty easy. I think they had different color options last time I checked. They also have dimmer as shown in the picture. Made my desk look nicer.

I'm so pleased with these lights. I bought two strips to go above two areas in my kitchen. The strips are placed in back and around front of the objects I have up there. I wanted a soft light so I have them at 20% brightness which works great. Based on the information about the adapter plug, I made sure to buy one with the right voltage and it works fine. Easy peezy. For my project I drilled a hole into the middle cabinet because there is an electrical outlet in there and I could plug both light strips into an adapter and put it on a timer on the outlet. As described, once I set the brightness at 20% every time the timer comes on in the evenings it stays at that 20% brightness level, so I don't need to adjust anything each time. It's beautiful and working perfectly.

These were perfect for adding a splash of accent lighting to my kitchen. They are fairly bright on the highest setting, almost blindingly so if you look directly at them. I usually leave them a couple notches above minimum to add some pleasing atmosphere, but it's nice to have them at max for the added light while cooking. Installation was very easy, just peel and stick. The wireless remote is fairly cheap and flimsy, but it does get the job done. I have to knock off a star because I have occasions where I have to do double or triple presses to get it to respond, but it's rare. One other minor gripe is that these are advertised to be used as under cabinet lighting, but the way the cord is designs makes it obnoxious to mount and not looking distracting. The power cable is hard set into the unit and comes out of the bottom, while the lights come out at the top. It leaves a lot of slack hanging that I had to sort out in a creative way. If I had my preference, the controller would have a quick disconnect for the power to a standard adapter and then I could choose my length (it's just USB so this would not be difficult to do and I might honestly just modify it myself in the future). I have also seen some people curious on if you can use 1 remote for multiple strips/controllers, and the answer is yes you can. I ordered 2 sets and a controller from one of them operated both units without having to pair anything. Your mileage may vary as I saw some reports that you had to pair them, but in my case I did not, it just worked. Overall I definitely recommend this product for its ease of installation, literally anyone can install these with a little patience.

Great lights, adjustable, so flexible you can double them over and get twice the light if you want (in a housing).

Not even two hours after using, it kept dying on me. Cords were not twisted or anything. I think it just burnt out until it never turned on again.

I didn't want the super fancy light strips that have RGB, a fancy app to control settings, or a cheap controller I have to put somewhere. This is a super basic and very solidly made light strip that includes an easily concealable inline switcher to adjust the brightness and to turn it on and off. The product listing doesn't mention this directly, but you can safely cut along the thin black line in the middle of each copper strip to shorten the length of these too. The adhesive is strong and is easily applied, only took a couple seconds to install. For my purposes, I needed a light strip that would retain brightness and power settings when toggled from a power strip, and it works for that. I plugged it into the power strip, turned the product on and selected a brightness, so now every time that power strip turns on, the light strip automatically powers up with the correct brightness.

The first light I received had a problem — the dimmer didn’t work. I contacted the seller and they responded very quickly. They sent me a replacement right away, and the new light works perfectly. Great product and excellent customer service. Highly recommend!

I’ve purchased multiple led strip lights so far this seems to be the best for what we need. Did not expect the usb powered light to be brighter than some more expensive direct power led lights we had purchased earlier. We got this for our kitchen counter under lights. It’s bright warm just the way we wanted it. The light is extremely low profile so far it has stuck well onto the cabinets and is thin enough so it was easy to hide. We had it for a few days so far it’s been good but mostly these lights in general don’t last too long. Time will tell if this can stand that test of time.

Good quality

Lo delgada y excelente luz

Was looking for a warm toned backlight for the television. This LED strip and controller was perfect for our 55 inch TV. Installation was as easy as peeling and sticking. I cut the strip into three pieces then soldered small wires to reconnect each strip. The strip requires 5V at 2A which unfortunately the TV doesn’t put out, so it required a small AC adapter to plug in, fortunately I had an extra kicking around. We are off-grid and have switched outlets for everything. The strip controller remembers its state including brightness next time power is applied. Perfect and very reasonably priced. I can highly recommend backlighting your TV for reduced eye strain. This unit is a very good buy.