This is the same manifold used in commercial beer systems and breweries. CO2 gas manifold converts one gas source to four kegs/lines. Add multiple manifolds together for additional kegs. Each line has its own shutoff valve. No check valve is needed since beer couplers have check valves built into the coupler, which eliminates any check valve failure on the manifold, not to mention beer system hassle from this type of failure. The majority of beer gas manifolds with check valves typically fail, due to check valve failures; check valves are for soda, not beer. A professional, quality manifold without a check valve, is one of the keys to dispensing the best degree of qualify draft beer.
H**
Leaky leaky
The media could not be loaded. One pro: it does have check valves.Remaining issues are all cons: 5 of 6 fittings leak during water test. See video.Was planning to install this in my kegerator before Halloween and decided I’d test in a bath before final install. Glad I did. The leaks weren’t terrible but bad enough. Since the fittings were glued in, it’s not possible to tighten them at all. Only choice is to return and find a better one that uses tape sealant instead. Don’t waste your time on this one.
E**2
It works
Works well in my keezer build. Seems to seal well so far, as I’ve not emptied my CO2 tank in the two weeks I’ve had it hooked up.I wish the ball valves looked and felt better. They look super cheap and their movement feels that way too.It does the job though.
W**M
Works great in kegerator
I have converted a few refrigerators in my time. This manifold makes it nice to be able to run one gas line in and be able to shut off each keg. I have not had any issues with leaks or anything. it works.
R**N
Good product
Good quality. No leaks. No issues with functionThe fittings are glued into the block to seal them, so if you want the inlet on the right this is not the best option
Trustpilot
1 month ago
2 months ago
