Cabinet Hardware Jig - Portable Straight Hole Drilling - Precision Drilling Without a Press - Moveable Edge Guide for Accurate Positioning - for Knobs & Small Pulls - KHI-Pull

Life saver! Had to drill 69 drawer pulls (138 holes). This was easy to use and keep the holes perfectly lined up. The metal drill bit guides are amazing, no guessing if the hole is straight or angled, the guides do the work for you. I still used a plastic cheap template to mark the holes and then used this to line up the marks and drill the holes out. Spend the money and get the job done right and easily

A must have. Easy as pie to install.

Works good once you figure out how it should be assembled - it came with no instructions.

My wife and I are in the process of buying her parents' home, and we decided to paint the kitchen cabinets and install some new hardware to freshen up the space. I purchased this jig and a couple of Kreg clamps to help us install handles on the cabinet doors, and pull cups on the drawer faces. This jig is a little tricky to get set up initially, as there are three different measurements to account for. First, you need the "center to center" measurement of your handle/pull (included with your hardware) to set the distance between the two holes. Second, the edge guide on the back of the jig sets you are a standard distance from the edge of the door for each drill. Finally, there's another measurement along the other axis that shows you the distance from the other edge. Fortunately, we had some scrap doors that we were not going to reinstall to experiment on with the positioning of the hardware. Our job was somewhat complicated by the design of our cabinet doors, which features a rolled, bevelled edge. After some trial and error adjustments, we got to work. This jig was a little difficult to clamp down and keep in the correct position, so it might be helpful to have an extra pair of hands and a second clamp. But to be fair, we decided to drill all of the holes for our cabinet hardware while we had the doors off; the process of setting and clamping the jig might be easier if your cabinet door is already hung and attached to the cabinet itself. Although it took some experimenting to get it set right, once it was, this jig definitely made the job faster and easier. I also bought Kreg's concealed hinge jib for the same project, and I've been very pleased with each.

I should have bought one of these things years ago, what a time saver this jig is! It's made high quality, I suspect it'll last many years. This has made my life much easier, I've already used it for over a dozen cabinet drawers and doors, and couldn't imagine not owning one of these again. This jig is accurate and easy to set up and use.

I was able to drill holes for 18 cabinet doors and 8 drawer pulls in about 45 minutes. Definitely beats the jigs that just let you mark the hole locations. With this, you just set your depth (the measurement between the edge of the door and the holes) and width between the holes (common handle widths are marked on the jig), clamp it to the door, and drill the holes. No marking and then drilling. You'll need a 3/16" drill bit (doesn't come with). The time and frustration I saved made this well worth it. I recommend investing in the kreg 3" face clamp if you have a lot of doors to do. TIP: I set the jig on the internal side of the door and used a rag under the metal face clamp pad on the external side to prevent it from making any indentations or marks. Not really related to this tool in particular, but was useful in the process.

Better than expected. At first I wasn’t sure the plastic adjustments would be secure and not shift, but they held tight after ten handles. Kreg quality!

Excellent template. Worked like a charm!

Excellent

MUY BUEN PRODUCTO, CUMPLE CON LO QUE PROMETE, MUY BUENA CALIDAD

I refinished my old kitchen cabinets and I’m doing so I filled all the holes from the old handles so that I could change them out (they had been on an angle). This left me with the daunting job of drilling into over 40 cabinet doors and drawers. As a diy-er it felt very daunting, I had considered making my own template and had researched some other jigs however decided to purchase this one as it’s from a great and reliable brand and I liked how sturdy it was. All I can say is wow, I’m so happy I did! It made the job so easy and I was able to do my kitchen in less than 2 hours (as a first timer). If you need to drill holes for cabinet pulls/knobs this is a must-have in my opinion!

I love this thing! As someone who paints furniture for a living and often replaces and/or changes the hardware, this jig makes the job so much easier. Perfect alignment every single time! It took a few minutes to figure out but thanks to the handy instruction booklet that came with it, it took no time at all.

Agilisas tu trabajo muy bueno , pense q el plastico iba aser debil pero es de muy buena calidad