LHI DX2205 2300KV RC Brushless Motor + 4 Pcs Motors Protected Base +4 Pcs LED Circle Board for FPV Racing Drones (2CW + 2CCW)

Motors and LEDs are great. Motor guards, meh. These motors rock, powerful and good looking. They worked flawlessly for me. Using them with 5045 2 blade props (3 blades are on order) and they are scary fast to me, nothing like the motors on your everyday off the shelf quad. I would not hesitate to use them again. The LEDs work well, too. Bright and easy to install. The motor guards are not for me, ugly and even if I wanted to use them none of the screws were long enough to fit through both the LEDs and guards. I didn't really want those green things on my quad anyway. Other than that I wouldn't hesitate to recommend these. Update: For some odd reason the LEDs are not designed with the electrical traces only running along the outer edge. One of the screw heads rubbed off the coating material and caused a short on the 5V connection. Everything was fluctuating and going haywire. I noticed one of the motors was getting very hot while not running and the others were cool. Once I removed the shorted LED everything worked fine. I'm glad it didn't smoke my PDB, it kept detecting the short and would shut down the 5V rail then turn it back on and detect the short and shutdown in a cycle. There's no reason for there to be anything charged where the screws heads seat, but the LEDs are poorly designed. I'm going to get some nylon washers for under the screw heads and make sure I Locktite them in.

Havent tried the motors yet but i already using the guards in another build. it works great! love the color too even tho it's very obnoxious, it'll help you see your quadcopter. the wrench tool is awesome, i use it all the time now, easily my favorite tool and it came free basically. these motors look like re-badged racestars from china and im currently using those and they are decent motors so i suspect these will perform exactly like those, for the price and all that it comes with (especially the tool) it's a great deal, if anything just to have a fast spare set of motors.

Great set of motors! They sound great when running and perform great as well! All the extras you get just sweetens this deal! You get 2 sets of screws and an Ball end allen wrench for each motor. So you can keep an allen wrench in your pocket and a couple in parts box to check tightness on screws wherever you fly! The other extras you can see the lights I got were 2 Blue and 2 Red, The motor guards fit perfect on my ZMR 250. I recommend oiling the bearings as soon as you get them, just to be sure! I use Hoppes Synthetic oil for lubing bearings and it works great for RC bearings. Only thing that could make this deal better is if they included a couple spare prop nuts, They are nice low profile and the nylock grips the threads when using with RayCorp 5x3 props.

nice motors but i cant use the supplied bolts as they are to short for 4mm arms . i ended up mot using the motor guards. they should have supplied longer bolts.

I fly a lot of fpv and these have zero quality control. I upgraded from 2204/2300. Once installed they looked good and after 2 flights the motors started getting hot and I had a lot of twitching. I start fiddling with tuning on the bench and spool up the motors. 3 motors had loose stators and the 4th motor had dropped a magnet. I had a similar problem with with the makerfire version of the same size. Just flabergasted. So I swap the backup set on to see if it will flbe the same.... Had a slight crash in some soft grass and the bell came off and BOTH bearing just fell out. 😨 That's right, I dug in the trash and salvaged a clip and two bearing from the previous paperweights to see if I can save myself the frustration of buying new motors again. I've flown a test hover and nothing has let go but I will update after a few more flights.

I was really surprised how nice these motors are, I was not expecing much based on the price but they are really nice medium to heavy duty motors. They are similar body style to the DLVP motors but have the smaller guage multi stranded motor windings. The Bell and Base are nice quality and thick material that resists bending in crashes. They seem to run cool and efficient giving me 5 to 6 minute flight time with a 5 in quad running 1400mha 4s even when running hard freestyle.

Bearings were just OK, but on 3S with 5x4.5x3 props, they're screamers. Can't even imagine running these on 4S. For anything less than competition, these are a great deal & you can afford a spare set. follow up:; After playing with these on a QAV-R for a week, I went ahead and bought another set for a 250 frame I've had laying around. Had one motor bad in the second set. The windings were loose, causing severe decoupling. Contacted the seller (LHI) & they sent a replacement motor. A+

One of my motors is faulty...Not happy with purchase..Not sure what to do....