PWAYTEK HDMI Extender 1080p@60Hz, 3D, Over Single Cat5e/Cat6/Cat 7 Cable Full HD Uncompressed Transmit Up to 164 Ft(50m), EDID and POC Function Supported (Transmitter and Receiver)

It's only for one tv or one device over long distance from hdmi to ethernet cable cat 5 , 6 . I was looking for one which splits at both sides as to take sky hdmi and dvd etc. Then at tv side it connects to another ethernet to another tv upstairs as old granite house wifi just not good enough. Also the original one's which were on system had a remote connection which could control everything upstairs as built into the house. But at least it works and not too expensive clear picture easy to use good signal. The original is fried as installers put it beside heat so it was like an oven. But this one is perfect for one device and one tv !.

I bought this 4K HDMI Extender as my main home entertainment kit is across one wall of the room and the projector is being relocated to opposite wall - around 20 feet away. I need something to extend the main HDMI from receiver to projector. Furthermore, I have older long HDMI, but it is thick / bulky and not good for 'hiding'. The projector has Ethernet in, but I wanted to keep that separate and was not sure if it would work anyway as projector is 'older' and I just wanted an easy solution. The 4K HDMI Extender was securely packaged and arrived within expected window. Pros - Lightweight - Small - Easy to 'hide' if need be - Robust metal casing - Uses common Ethernet cable : Mine is high speed Gigabit RJ45 cat7 10Gbps 600Mhz - The Ethernet cable is much easier to manipulate around room and easier to fit / 'hide' than HDMI [even thinner type] cable - Great, stable video and audio transmission - Remote control extender [works well] : This is a handy option that I trialled to be thorough but do not need to use - Uses standard HDMI between transmitter and source then between receiver and target Cons If I am being picky, I would have preferred a UK 3 pin power supply. The power supply [my case] is the European 2 pin type. The power in / out is not an issue as such! I solved this by using a good quality adapter that takes in the full pins and 'mould' of the 2 pin design and makes it a 3 pin plug - not a simple shaver adapter! Note: The 4K HDMI Extender is a two part set : Transmitter and Receiver. The two parts have power in options, but the set contains only one power supply. This is not a fault! Only the transmitter needs power. I was initially sceptical / wary as I have not previously used PWAYTEK. However, I am more than happy with the purchase and very much satisfied that the PWAYTEK 4K HDMI Extender has met my needs.

Updated: Excellent customer service who sent out new units due to defective ones after the return time via Amazon was up. I could not get a sound nor a decent stable picture over my 20m cable, the picture would not re-connect if I disconnected and reconnected turns out the 1st units were defective as they wouldn't work on shorter lengths either. The supplier sent new units out after the Amazon return time was up, and these worked a treat on shorter cables (10m). I then tried the 20m cables but using a newer set up of cable and this worked great! I'm trying to use my PC games on my homecinema set up, and hoping for a wireless controller to work with the controllers dongle plugged into the receiver end, but this is my only thing to solve now. Keyboard and mouse works fine, so I am not sure why the controller doesn't work? So far the customer service is great, and the units appear to be working fine up to 20m+ .

We have an older Sky + box and it connects to a remote TV using the RF out and a magic eye. Being RF (coaxial) it’s not great quality. I can feel that a Sky Q box will be inevitable sooner or later and wanted to have a solution in place that would work for us (as there is no RF out on Sky Q). This required me to do some hole drilling and cable laying to get Ethernet to the remote location but once in place this works perfectly, including IR pass through. Just for anyone who needs clarity this will not give you multiroom as such: it’s just duplicating a single signal. At the price, and compared with other far more costly alternatives (HDMI over wireless, HMDI over Powerline) this is a no brainier. Absolutely recommended. I find the negative reviews inexplicable.

I bought these with a 30m flat cat6 cable to use together and I found that I could not get a picture (laptop to video projector - tried every possible resolution and frame rate) and I also tried with a 50m flat cat6 cable and had the same problem but it worked fine with a 2m flat cable and a 25m tatty old bit of round cat5 so I think there just must be an issue using this with long flat cables even though they are rated at cat6 and above. I need to get a longer round cable to test more fully but I was really hoping to use the flat cables for this installation. EDIT: I have adjusted my score down as I have now tested with a brand new, round, 50m cat6 cable and could still get no signal through so I am returning as it is not suitable for my application.

I bought this at the end of July and it’s now the middle of September. I run it over cat5e from downstairs where the virgin media box is to upstairs in the bedroom. It’s been flawless, no dropouts at all like my old one. One thing to note is that this is hdmi extender only, not infra red, meaning it doesn’t send your remote control signals too. Luckily, because the virgin media remote control uses RF this is not a problem for me.

📝 DESCRIPCIÓN Transmisor de vídeo HDMI a distancia por cable ethernet. En Amazon hay otros modelos inalámbricos como éste: https://amzn.to/3AKN4cM 🧾 ESPECIFICACIONES * Resolución máxima: 1920*1080@60Hz * Distancia máxima: 150m * Compatibilidad: HDMI 1.3 💶 PRECIO 25 de Septiembre de 2021: 65,99€ 📦 CONTENIDO * 1 HDMI tranmisor * 1 HDMI receptor * 2 Adaptadores de corriente * 1 Manual de usuario 🟢 PROS * Plug and play * Buen funcionamiento * Varios modos de transmisión * Dimensiones reducidas * El emisor dispone de una salida HDMI 🔴 CONTRAS * En alguna ocasión veía la imagen entrelazada * No viene con cable ethernet 📖 MODOS DE CONEXIÓN * CABLE: El modo de conexión más sencillo es mediante cable. Es capaz de transmitir la señal hasta una distancia máxima de 150m. Evidentemente, no pude probar esa distancia para verificar que funcionaba, pero en distancia más cortar, de 15m se veía correctamente. * PLC: En algunos comentarios de otros dispositivos leí que no funcionaba mediante unos PLC. En mi caso, me funcionó perfectamente. Tuve que probar 3 PLC diferentes y la verdad, no con todos se ve igual de bien. Con algunos directamente no se veía, otro se cortaba bastante y con unos D-link, se veía muy bien: https://www.amazon.es/gp/product/B00PVE2DP0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 * ROUTER o SWITCH: Probé conectándolo directamente a un switch. En algunos comentarios había leído que para que funcionase, tenía que conectarse el transmisor en el puerto nº1 y luego en los siguientes puedes conectar el otro o varios. En mi caso, yo probé conectando el transmisor a un puerto que tenía libre del switch que no era el nº1 y el receptor a otro puerto disponible y me transmite perfectamente. * ROUTER o SWITCH - WIFI: Otro modo de funcionamiento que probé, fue el de conectar el transmisor a la red de casa, integrándolo en un Switch /Roouter y en otro punto de casa, instalé un Punto de Acceso wifi conectado a la red principal. Estos Puntos de acceso tienen un puerto Ethernet con salida de red, que conectándolo al dispositivo receptor de vídeo, también me funcionaba. En este modo, se cortaba más, ya que depende de la cantidad de tráfico que está soportando el Router/Switch y de la calidad de todos los dispositivos wifi. * WIFI: Otro modo que estuve probando, fue la de conectar el receptor y el emisor mediate wifi. Para ello configuré dos puntos de acceso, sin que estuvieran conectados a la red principal, para no sobrecargarlos de tráfico y a estos puntos de acceso, conecté el Emisor y el receptor de HDMI en habitaciones separadas. Para este modo, configuré el punto de acceso principal a una red wifi inexistente y el otro punto de acceso al primer punto de acceso. De este modo, sin tener que compartir ancho de banda, me funcionaba muy bien. 8️⃣ VALORACIÓN Cogí estos dispositivos para poder enviar la señal del satélite, desde el salón hasta la habitación, para poder ver los deportes en el proyector. Antes de este sistema, tenía un Fire Tv, en el que veía los partidos, pero la señal de imagen va retrasada respecto al directo, por lo que en más de una ocasión me enteré de los goles por medio de los vecinos, cuando en mi imagen aun no había sucedido. Por este motivo, estaba buscando un sistema que pudiese llevar la señal de HDMI de una habitación a otra. En su día había visto unos dispositivos que el propio dispositivo transmitía la imagen por sus propias antenas, pero eran más caros. Al final encontré este sistema, en el que puedo aprovechar los dispositivos que tengo en casa a través de la red doméstica. No imaginaba que fuese a funcionar tan bien ni que tendría tantas opciones de conectividad para poder enviar la señal. Una vez que los dispositivos se conectan a la red principal, se integran en la misma y se le asigna IPs diferentes. ✅ CONCLUSIÓN Un sistema de transmisión con una relación calidad/precio en la media del mercado. Cumple perfectamente con su función y no necesitan configuración. 👍 RECOMENDABLES. ✳️ Espero que mi comentario ✍️ te haya podido servir de ayuda. 😃

Fonctionne très bien pour déporter un décodeur k4 dans une pièce éloignée

Haarscherp beeld. Let op: een draadloze muis of toetsenbord of gamecontroller aansluiten werkt niet. Echter leverancier nam apparaat direct terug, geld terug, was snel geregeld.

Fonctionne très bien.

Ottima qualità video e facilità di installazione, funziona anche attraverso diversi switch di rete, purtroppo ha un problema con i dispositivi home theater collegati tramite ARC, smettono di riprodurre l'audio se si collega la periferica al tv, l'ho fatto presente al venditore che mi ha rimborsato.