Raindrip Rain Drip 100050211 Black 016010T 1/4-Inch by 100-Feet Tubing, 1

Build quality was superb. Works as expected.

ممتاز بس عيبه فيه قساوه شوي متيبس مش مرن بزياده..ممكن بسبب بروده الطقس والله اعلم

Es bueno el producto

I have installed it and it works. This product has designs that fit specific needs. I bought this and it works with the "Flantor Drip Irrigation Kit" that I bought earlier. It also fits the 1/2 threaded-1/4 barb converter with 5mm OD+ 6.5mm barb. Disadvantage: There are earlier reviews saying it's stiff and needs extra care to reshape. I've found the same. They are way stiffer than the Flantor tubes, so I need to use my hairdryer to heat them before forcing them over the barb. After blow-heating, they can get on the original barbed drip heads by Flantor, but they need 2 steps to fit the 6.5mm barbs: I use the Flantor barbs to expand these pipes first, then heat them again, then push them onto the 6.5mm. I suggest either preparing them indoors first or connecting a power cable to your work site. In comparison, my Flantor pipes are soft and can be directly pushed in. The advantage of being stiffer is that once installed, they can withstand much stronger water pressure. In comparison, my water pressure is higher so my original Flantor pipes (designed for <20 psi systems) pop open sometimes, and my current solution is to bury them in the earth. This new pipe works fine at higher pressure and has never popped. In summary, if your water pressre is <20psi, you may find this pipe too stiff and hard to install, but if you have the same high pressure issue like me and don't want to install another regulator, you may like this type of stiff pipes. I only had it for a week so I cannot comment on the durability in the California sun.

Good value on this product