Forged Upper Control Arms for 05-23 Tacoma | 10-24 4Runner- 74201A

Rough Country only recommends these for 2010+ 4Runners and 2005+ Tacomas. That made no sense to me since all other UCA manufacturers fit all years of 4Runners from '03 on up. I rolled the dice and bought these since they are several hundred dollars cheaper than other high quality aftermarket UCAs, are forged aluminum, and look great. I figured if they fit a 2010 4Runner, they should work on a 2003. I bolted them up along with Bilsteins 5100 and Wheelers T1 springs on the bottom notch. This gave me over a 4" lift, but that's because my original springs were sagging so much. It's probably closer to a 3" inch lift nominally. Before I bolted them up, I took measurements of my stock UCAs and compared them to the Rough Country UCAs. Everything was exact, so I bolted them up and they fit perfectly. I took it in for an alignment and everything aligned with no issues. My wheels are centered in the wheel wells and only required a very minor amount of trimming to keep the tires from rubbing. I was even able to keep my front mudflaps after trimming some of the center material that was rubbing. I've very happy with these Rough Country UCAs!

I recently did a 3 inch Bilstein suspension lift on my 2006 4runner. I used these upper control arms to correct the angle. They fit perfect.. look nice and pretty easy to install. I was hesitant because the description said 2010 and newer 4runner, but they fit perfect on my 2006. Right now I have factory 18 inch wheels and there is no rubbing. Larger 33” tires are planned for the future. I will update if any issues. They seem to be good quality, and if the durability holds up, it will be a great value.

These control arms are probably the best on the market for highly lifted trucks. I’ve had multiple in the past and the “extended” version is never really extended. These actually help your angle really well. I am disappointed with the quality of the shipping though. They were pretty much just thrown in a box with some brown paper so they were scratched up when I got them

First set had torn boot at seam. Second set started clunking sound in passenger floor after 2 months. I already paid mechanic two separate times for these. Well I'm going to see how long it goes till it blows because baby Mama needs money no food stamps wish me luck I would avoid this product for the tacoma

I ordered an Eibach coil over suspension life for my new 2023 Toyota Tacoma. I wanted to make sure the suspension lift had a quality upper control arm to accommodate the lift without the dreaded positive camber that comes from lifting a truck. (Especially Toyotas). The control arms exceeded my expectations. Many avid Tacoma owners cringe at "Rough Country" as being a budget after market company, but make no mistake, these upper control arms are solid. I did use a 1" hub centric spacer on my stock 17x7 zero offset wheels, because I upsized my tires from 265/65R17 to 285/70R17s and there is zero rubbing on the UCA after alignment, Have been purchasing more and more Rough Country products because of this quality. Have also purchased RC step tubes and RC retractable hard tonneau cover. Highly recommend and will be purchasing more products from RC as I continue to build my truck!

These are great beefy looking UCA’s and work perfect for the RC 3.5 lift. I put them on my 3rd gen Taco and couldn’t be happier. Well worth the money and a 1/3 of the cost of similar quality UCA’s. Installation was a breeze since I had already taken out the installation bolt before. Otherwise you need to bend the fender well to get the large bolt out and remove your old UCA. If your going to lift your truck 3.5”, buy these, you won’t be sorry.

This product absolutely enabled my 2018 4Runner with 3" of lift to be aligned to factory specifications. Installation was simple. Be sure to unbolt any brackets or lines they advise you to. On the passenger side there was no need to bend sheet metal to remove the long pivot bolt. On the driver's side there was only one spot about 1/2" long that I bent back 1/4" using vice grips. That effort allowed the big bolt to smoothly slide out. Ahead of time order some new clips for holding in the rubber fender skirts as you'll probably break some when loosening the rubber skirts. If you need new rubber skirt panels I recommend you order on Amazon from Yota liners. Fitment is pretty good and I only re-punched one hole.

Great product for the price and from a company thats not going outta business and you can get parts or warranty.

Easy to install

Nice quality UCA and looks great on the Tacoma!

I replaced the factory upper control arms and blown out bilstein 5100's with these Rough country upper control arms and a set of bilstein 6112's two big variables but the ride quality has improved for sure. It's hard to say if it's the new coilovers or the upper control arms are both but if you're changing your suspension the angle change of these upper control arms are bound to help when the truck is lifted, both for ride quality and longevity. There are videos online about how to switch it out, but I will say that you will need a long pry bar to pry your wheel well edge over enough to pull the long bolt out. It looks impossible on the passenger side but it will push through with some coercion. Just make sure you dismount everything in that area under the hood so you don't wreck anything in the process. Sounds more daunting than it is. Look in your wheel well and you see what I'm talking about. Anyways would recommend. Good product

these are awesome! great fit for my ‘14 Tacoma they come packed in foam and include instructions and stickers

Have had these for a month now, still happy with the quality for the good price. Would recommend over other very expensive brands that do the same thing.