Airthings 2960 View Plus - Radon and Air Quality Monitor with PM 2.5, CO2, VOC, Humidity and Temperature Detector, Mobile APP, Wi-Fi , Notifications

i've used this for a few months. its very good and accurate enough for home use. kept in kitchen. display is good. batteries first installed 9 months ago and still going strong. app is also good and informative for current and historical readings. worth the cost.

Very good works perfectly from anywhere. Monitored my house in Devon while in Crete.

While the device worked it was great. Nice interface via Android app and via the website. Historical charts were handy. However, after about 8 months the device would just refuse to connect to the Internet so it provides local only access (via device's screen) to the air condition at the moment (readings lost without Internet access). In attempt to fix I have tried factory reset/unpairing/setting up again so I have lost all historical readings. Infuriating! I am now trying to get support to advise but I am already regretting this purchase. UPDATE: few months later it become unresponsive again. I was able to use another phone to set it up. I've had to start another measurement as the old one is archived. Once I set it up with a new phone I have lost ability to control the device from both phones. It still feeds that data to cloud, at least. So far, support is pretending to be helpful. Apparently, Pixel phones' users are experiencing some issues. Well, now I also do have issues on Samsung.

This is one of four different air quality monitors I bought from Amazon at the same time. I purposely wanted to compare performance (accuracy in particular) to make sure I wasn't being taken for a fool and to reject anything that was just making up numbers (one of them was). As far as this product is concerned I feel that it has the most comprehensive and trustworthy data of all of them. Unfortunately it is also the most expensive by some margin. I don't mind paying for quality though, so that's OK. No point spending cheap just to be told some lies. Anyway, the app is excellent, with lots of data available and comprehensive graphs that are detailed and informative. I'm less impressed with the actual unit though. Having three other monitors to compare with, I find the physical display in the device to be distinctly underwhelming. Frankly it is near useless. Only two fields on display at any one time, assuming you have sufficient light to read them, but no indication of air quality unless you move over to the device and wave your hand CLOSE to it. No chance to glance at it and just see the air quality from afar. Air quality is not even a displayable field, so pick two random favourites from the sensors available and be left guessing about the rest. In contrast I have the Amazon AQM, which displays no data at all, but does allow you to see the coloured LED to check on the overall air quality with a casual glance. My other two AQMs either display all day at once or (can) cycle through the various data points one by one. Air quality is on display at all times. I think there is much room to improve the display on the View Plus. More data fields, backlight, always on LED. If the unit is plugged in, why wouldn't you want and expect 24 hour at a glance visibility? I can understand the wish to save power when running on batteries, but mine is permanently powered. Maybe a firmware upgrade can enhance the interface.

Quality product. I bought it because I use a multi fuel stove and kerosene heater and was concerned about air quality. This monitor gives very comprehensive information. Don’t know how accurate it is but it’s responsive. On one occasion I burned an incense stick for just a minute and PM went straight up from usual 2 to 134. Batteries went down only by 16% in over 3 weeks. Strangely, it asked me to change the batteries shortly after switching on, so I did. However, I tested the batteries that came with the product and they were fully charged. Overall I’m very happy with it. Worth the money. The app works great.

Edit: blew through it and it's fixed, must've been dust built up on the sensor! Original review as follows: Excellent device but two years in, it's malfunctioning regularly. Keeps reporting massive particulates until I take the batteries out and reset it. Works well again for a period then malfunctions again. Two years good service ain't bad I suppose, I'll probably buy the same device again as a replacement

I ordered this Airthings View Plus air quality monitor as it seemed to be well regarded and more professional than the other ones available and it could also read radon gas levels, something which is rare in such a feature rich device like this one. It is one of the reasons it costs so much. What surprised me is just how fast CO2 levels build in a small-medium sized bedroom within a short space of time if the windows and doors are closed. I wasn't expecting that. I am talking about just a few minutes. The other one was the VOC (volatile organic compounds) reading. Mine was reading between 40 and 80 on average, within acceptable levels. However when I opened a moisturiser bottle to put moisturiser on my face and head as I suffer dry skin, the VOD reading jumped to nearly 4,000 in just a minute or so. It's amazing what is in the air we breath, and it is more often bad than good. I now use a air purifier in my bedroom and make sure my windows are always open slightly, even if it is cold outside. I am happy with my purchase, and I think the app is useful. There was an additional app I was offered to download that is just called Airthings, rather than Airthings Wave, and it is a little confusing why they have two apps that do the same thing, but it seems the one just titled Airthings is the one that's been updated most recently. I prefer the older Airwaves Wave app though as the layout is better and it gives you CO2 readings and radon gas levels earlier on after initial setup than the app just titled Airthings.

I love this product. It was very easy to connect to wifi and to have the ability to track PM2.5,TVOC, radon, temperature and humidity all on one unit is very convenient. I bought a second unit to monitor the downstairs as well. As far as accuracy goes, it seems to track PM 2.5 closely to our outdoor conditions so I am happy. It is still too early to tell on radon but am doing a 3 month traditional test that will be completed later this spring so I will be able to compare. One benefit is that I can shut down air purifiers (saving filter life) when conditions dictate. Also, as CO2 or TVOC levels increase, I am able to start ventilating. Amazing to see the spikes in PM2.5 with cooking. Anyway, great device with excellent data stored for analysis. I love it.

Rilevatore di inquinamento assolutamente eccezionale, la cui unica pecca è il prezzo un po' alto. PRO: - Facilità d'installazione: si installa in pochissimi minuti, le istruzioni sull'app sono molto chiare e comprensibili. - Radon: uno dei pochissimi in grado di rilevare anche il radon, solitamente si deve comprare un dispositivo dedicato. - Personalizzazione: il dispositivo può mostrare 2 tra le tante informazioni che rileva (PM, CO2, Radon, Umidità, ecc...) - Può funzionare sia a batteria, che via cavo USB C, che con entrambe le fonti di alimentazione. - Ha un piccolo sensore sulla parte frontale che consente di avere un riepilogo degli inquinanti quando si passa la mano davanti. - Disponibile sia da APP che via browser, un riepilogo completo con tanto di grafici, dati medi, dati aggregati, ecc... - Il tutto ha già delle scale di valori per cui quando i valori diventano gialli o rossi si ha intuitivamente un idea sulla gravità degli inquinanti rilevati. - Possibilità di avere delle notifiche da App quando si superano le soglie su uno o più inquinanti. - Anche se manca la connessione a internet il dispositivo conserva le informazioni per qualche ora e se torna disponibile le carica con le altre. - Viene fornito già con un cavo USB --> USB C di una lunghezza molto alta, molto utile. CONTRO: - Non è disponibile la lingua italiana. - Prezzo un po' alto, preso in sconto a poco più di 200€, a 300€ non so se l'avrei preso. - Fa un piccolo rumore quando si aggiorna per rilevare gli inquinanti, può dare fastidio se lo si tiene vicino a dove si dorme, nel caso basta alimentarlo via cavo e staccarlo di notte. - Il display non è retroilluminato, quindi serve sempre avere una fonte di luce per leggerlo. Consigliatissimo.

Mide todas las características relevantes de la calidad del aire en un solo dispositivo: dióxido de carbono, compuestos orgánicos volátiles, PM 2.5, temperatura y humedad, radón, presión del aire. Viene con 5 años de garantía. Manufactor desarrolla continuamente aplicacion móvil y firmware. El único punto en la lista de deseos es hacer un mejor uso de la pantalla porque solo se pueden mostrar 2 valores a la vez.

Cannot be used with home assistant etc without the hub which also requires use via their cloud service. Very expensive standalone device.

Nice product