Mophorn 40W 45L Electrostatic Powder Coating Machine with Spraying Gun Paint 450g Per Minute WX-958 Powder Coating System (40W 45L)

I have been using an Eastwood Dual Voltage gun for 2 years and within 2 minutes this machine blew it out of the water. I never knew what I was missing until I shot a piece with this gun. I will say this...The instructions are trash, completely worthless. On the other hand if you don't know how to do a Google search and find things in 2020 then you may not deserve to have a machine like this. Back to the machine. I can't believe I was actually selling my parts with the EWDV. I'm really too excited to continue to write this review. Just get the damn thing. You wont find a better unit and honestly I didn't even use a proper ground. lol

I first bought one of these machines when we went to powder coating vs spray painting. Huge upgrade in quality of product and time. Fast forward years later, my original machine finally bit the dust, luckily I had already purchased a second machine to be able to run two colors at the same time. And I bought a third top replace the down machine. Still trying to diagnose whats wrong. The biggest downside I've found is finding replacement parts for the gun. We switched to the literally in the ground ground that we used to use on the plasma table and it has great charge. You do need to play with the air settings to not have the gust of powder. I lower it for the small cannister and raise it for the large one. All in all, these machine have been an indispensable part of our business that countless hours on them and have proformed like a champ.

Ok bought this work ok then went to dumping powder with no control ok first thing set main pressure no higher than fifty the powder pressure needs to be higher than air bubbler and air cleaning needs to be a hair higher than powder or you will back flow into reg then lose control I replaced reg and bought better ones now fine tuning is a dream. So recap set main I run about 40 psi my powder set at 4-5 psi air clean set to around 7-15 air bubbler set at 3 keep in these Mind if you set air cleaner way higher than powder it back flow same as air bubbler then once powder gets in air reg then the fun starts other than that for what you get this thing does the trick I also run the Eastwood 2lb hopper now for big panels this thing a hog and goes I love this thing do homework there no instructions that make sense if you handy and can figure things out this is for you if not then buy a name brand

This came faster than expected. The first coat laid down did fairly well but I noticed I could not get enough air to the tank to carry powder without it blowing powder off the part. I thought it was just all in settings so started adjusting the rinsing air the bubbler and the cloud air. Nothing changed on any gauges except the main powder gauge. I opened the panel to find out if I was getting pressure and realized everything was hosed in line with that powder regulator and gauge. The hoses are hooked up backwards for the rinsing air and the line going to the tank. The center regulator does not work at all. Swapped it with the rinsing air regulator and was able to adjust it but once again with it all hosed together you cannot get enough pressure to the other regulators and gauges without blowing way too much pressure back to the tank. I guess I got what I paid for but this system is not a plug and play system. If you know your fair share about air electrical and powder coating it can be made to work but the way it comes out of the box is not going to work. I spent a whole day messing with it and researching it but the instructions are garbage. The unit I got was Vevor instead of Morphon. Same exact machine but branding is different which is common with these China specials. I will make it work but it’s no where near an industrial gun like a Gema. Just in full disclosure the voltage and Ua controls work nicely but the air set up is garbage. Wish they would send me a new regulator but I’m not taking it back apart and sending it back for a new regulator. I will try to make it work and if I can’t get it I’ll just pull the control board out and use it on another machine. A 10th of the price to name brand machines but it’s easy to see why.

I've had this unit for almost 3 years now, and I cannot say I've ever had it working properly. First, you definitely won't know how to hook it all up, the instructions are trash. Second, it never shoots powder consistently. You'll be cruising along with a sort of consistent spray, then all of the sudden it will dump 10X the powder on you. No guidance on the settings, you'll be guessing...I'd never recommend this unit, I wish I could get refunded.

great machine after being plumbed the correct way with air lines.

This machine is great! You won't find a better one unless you spend thousands. I had an issue with my order and it was resolved as fast as humanly possible and with excellent communication. Extremely satisfied.

Works great when you finally figure out how to hook it up. No diagram or instructions on how to hook up hoses. Took a while to get it working without

El precio es bueno Lo malo no trae instructivo de armado