300g UV Resin,Upgraded Hard Type Crystal Clear Epoxy Resin Up Premixed UV Cure for Craft Jewelry Making

I make small batches of one-of-a-kind jewelry pieces and accessories. This resin is perfect for that. It cures very well under UV light. This is a great resin for beginners! Very easy to use, it is very clear, and has very little air bubbles. Here are some tips and tricks for those of you just getting started with UV resin and to make sure you get the best results: Make sure you are using a transparent mold and cure from both sides. I do not recommend using any opaque molds. (Opaque molds are typically the pink or blue ones you see at here on Amazon, but they can come in other colors too.) There are a ton of transparent molds here on Amazon, just search for “UV Resin Mold” specifically. A majority of the molds I use have come from here. They will be clear to milky white, but clear enough for light to go through one side to the other. If you don’t use transparent molds, you will not be able to cure from both sides, and will have issues with your pieces fully curing. I also spray my molds with 91% rubbing alcohol, which helps to cut down on micro bubbles significantly. I also lightly mist 91% rubbing alcohol over the top once I have cast my molds to further rid my casts of any additional micro-bubbles, and then use a heat gun over the top for any stubborn bubbles, if there are any. (Note: Do not use a lighter over the top for bubbles if you spray them with alcohol!) Also, make sure you don’t spray too much alcohol, or it may take longer to cure under the UV light. My thickest pieces are typically less than a quarter inch thick, so curing time can vary from 2 to 5 minutes, depending on the density of mix-ins along with the thickness of the mold, and how many times I cure both front & back. Once I de-mold my pieces, I cure them on both sides under the UV light one more time to make sure they have cured all the way through. Speaking of mix-ins, make sure you are not using opaque dyes, mica powders, or too much opaque glitter. If light can’t get through the piece, it will not cure. I typically use transparent dyes along with glitter that is transparent polyester (no metal). It’s OK to throw a few little pieces that are not transparent into the mix, the key is making sure the mix isn’t entirely made up of opaque items or opaque dyes, otherwise, your items will not cure in the middle and turn out soft or “bendy”. I prefer UV resin over traditional resin, because I have such a small work area, and work with small items and small batches. UV resin makes it a lot easier for me to get through everything in one shot, rather than having to find a place for everything to sit while I wait 24 to 48 hours for everything to cure before I can de-mold. (Instant gratification!!) No resin is ever fume free, but the fumes from this resin is very light compared to others I have used. It smells very similar to a nail salon that does gel nails & acrylics. I highly recommend using in a well-ventilated area, using a respirator, and wearing gloves. Due to some of my pieces being extra small and needing precision, admittedly, I sometimes go without gloves, but I work right next to a sink and I am constantly washing my hands as soon as anything gets on them. I would not recommend UV resin for doing thicker pieces such as pyramids or larger clear orbs, pieces such as trays or boxes, or items with deeper molds. 2-part resin would work best for these. (And would be more cost-effective.) For jewelry pieces, key rings, hair clips, and other small items in smaller quantities, it is an excellent resin! I have tried many other resin brands, and this resin gets top marks for curing, clarity, and price! I hope this review helps some you just getting started with UV resin. Happy creating!

this uv resin is a frequent buy for me. I make badge reels for customers. after a full month of having my own badge reel, there are still no scratches on the surface. It has a great glossy look to it, can be used with HTVRont sticker paper and inkjet print work. It does not go as far as Lets Resin Brand, but I feel it is better quality and a still a cheaper price. With Let's resin, I can get about 30 coats out of 1 bottle, with this I get around 20, 15 if I don't warm it up before use. the badge reels are usually 2x2 in at most and it does need to be warmed, otherwise, due to temperatures in my basements, the shine shows ripples, flat ripples. So, anyone who uses uv resin knows that it has to be a proper temperature in order to use it right. Five stars. Cure time is great, within 2 or 3 minutes as it states is true, the hardness is great. For the price, the size is consistent to its competitors.

Awesome product! Very easy to use. Lots of work time. Will not harden until you cure it with UV lamp or sunlight. I work with it in a limited sunlight room. I have used it to 1) pour into molds for jewelry. (You have to cure it on 1 side then flip the mold and cure it on the other. Do NOT recommend for making Jewely with a solid back like a metal tray etc. since you cannot cure the back side with UV so it will not cure. However, works great to seal the top of the piece of jewelry, to dome it, or add top embellishments. You CAN use it in trays, etc. IF you pour and cure it in LAYERS!! Then it works GREAT!) 2) Used it to seal both vertical and horizontal planes of dioramas. (Is a bit this so I use a paintbrush in thin layers. Works great!) Super clear with very few bubbles, VERY LOW ODOR(I have asthma, and this causes me no issues), suer fast shipping and great price|! Overall, an awesome product at a great value!

Hardens very quickly under lamp and is my favorite resin! My earrings are very strong and not flimsy breakable!

The resin itself is pretty good. I have noticed it used to cure a bit faster, but possibly its just a light strength issue. Only thing to complain about is the cap can get resin inside it and be a bit messy. It has lasted longer than I expected, so I have been pleased on the value for the price.

This product is very easy to use; much easier than mixing and stirring two components. It is much more convenient as dries quickly. The only thing you need is a sunny day.

I love this UV resin I purchase it often, cures nice a clear!

This UV resin works beautifully — it cures quickly, hardens to a durable finish, and keeps colors vibrant without yellowing. The hardness and clarity make my jewelry and charms look professional, and cleanup is super easy. I also love that it requires no mixing or measuring, making it perfect for fast projects.

W polowaniu w którym miały być 3 sztuk znajdowały się tylko 2, nie zgodnie z opisem

J’ai commandé cette résine UV pour faire des bijoux et elle est super bien, je recommande.

Sehr zufrieden! Die Lieferung kam einen Tag später - tat dem Bastelergebnis aber keinen Abbruch ;) Alles super, gutes Material! Würde immer wieder bestellen, wenn erforderlich! :)

Résine uv d'excellente qualité. Très peu d'odeur/vapeurs/émanations, fini transparent magnifique, rétrécissement normal et durcissement super rapide sous lampe uv. Avec une nonne lampe uv, 365 nm + 405 nm, cette résine est un vrai bijou pour tous types de travaux. Même pour les moules.Je vais clairement acheter une 4eme fois de cette marque en moins de 3 mois.

Je suis contente de les avoir eu par 3 car s'est pas facile de trouver en grande quantité