F5S-H6 CAIG DeoxIT FaderLube, 5% Spray, 5 oz

Superb performance. Cleaned pots on vintage stereo with slight application.

good quality, good value

I absolutely love how this corrosion-resistant spray enhances the operation of my equipment and reduces electrical noise significantly. It's amazing to see the positive impact it has on performance and noise levels. Highly recommend it for anyone looking to optimize their tools and minimize disruptions.

If the thing you need to fix has a carbon track (like a potentiometer used for volume, tone controls etc) this is the one to use. Deoxit D5 works great for switches but can damage carbon tracks so use this F5 for those. Just used it to fix a scratchy volume control on my childhood Technics SU-V6X amp I bought in 1985 and now the volume control is perfect again.

This stuff is great! It revived the scratchy old pots on my 90's Peavey guitar amp!

Works good on volume controls not great on switches

Used on an old school vintage clock radio. The volume control made a horrid sound when used. Making the radio useless. We all know the situation. We go to turn on our favorite radio and one day SCRATCH, CRRRRRRUUUUNNNCHHHHH, STTTTTAAAAAATTTTTIC.. And, your heart sank. Knowing your old trusted friend has seen better days. Or has he? All you need do is have or gain access to the rotary mechanism inside your electronic friend, and no need to even take it apart or remove it. Just need to get behind the cover. Find the knob or slider and see where it comes together. The board material, and the metal or plastic housing for the rotary or slider? Unplug the electronic device. This stuff is very flammable. That is all you need access to. Dust off any dust in the area if any first. Have some paper towel or rags handy to help clean up. It won't be much. When using the straw make sure it is at a right angle or sticking out straight. I used a pair of pliers to make the end of the straw oval and thinner to fit into the crossfader fader slots. You do not need to spray a lot. A solid press then stop. You only need a few drops to get into the mechanics. Then rotate or slide the item being cleaning back and forth for a minute. Then if the rotary or slider started all the way to one side. Move it to the other now. Spray again. Just as before a few drops. This is water thin material in the can. And, a small amount goes and goes a long ways. Repeat the moving of the dial or slider. Doing this for a minute or two. Imagine your car is dirty, you take it to a car wash. You are in effect doing the same now for your electronic devices. And, the lube is built into this, so it is like the wax on the finish to keep it clean longer. This can be used on any rotary or slider styled electronic control. It is best to take apart the actual electronic item to get you closer to the mechanics behind the scene that are in need of help. Always unplug your device, remove batteries and such as this is a very flammable liquid. Do not use WD40. Because you are only cleaning the mechanics a little. Then leaving them raw and exposed. If your electronics get water in them then use WD40 because it is a water displacement spray. Not a lube or oil. Value for the money: My one repair tonight paid for this can and more. My new Mini Innofader Plus came 100% ready to use as is. After using this on it the movement improved 100% more. If you own anything electronic with rotary or slider controls, then do yourself a huge favor and get a can of this. Become your neighborhood electronic hero with this. Or, just to save yourself a fortune in repairs or worse replacements. How I discovered this product - The InnoFader I bought years ago had a tiny cute tube of DeOxIt redish color in it, I honestly didn't even notice it until my first InnoFader was having issues. I cleaned the years of dust and such out of it. Still goofing up. Went online and read about DeOxIt and wished I had some. Out of frustration I pulled out the InnoFader box, it is very small so I kept it with my DDJ SX2 original crossfader in it, and that was when I noticed that cute tiny tube of DeOxIt. I used 3 drops and the 99% of the issues solved. The movement felt like a hot knife through melted butter. Smooth! I had unfortunately handled the InnoFader in a manner that caused it to eventually skip or jump around as it went to the left or right 100%. As it would close or turn the sound to the left or right off. It would occasionally jump towards the middle open. I did check curve settings and made sure I was not in CUT mode. The curve setting dial was half way. Mechanically I must have pulled the lever towards me, causing the carriage to fail partially.

this goo is absolutely ESSENTIAL for electronics. have used the stuff for years (as well as it's compatriot w/ the red label) & it never disappoints. bought it originally for use w/ guitar components but have found myriad other applications where it's proven to be a fabulous concoction. would HIGHLY recommend for electronic 'dials' & such of any sort or kind; i use it on all guitars & amps, my motorcycle, stereo equipment, tools of all varieties, & basically anything else that incorporates electronics w/ moving parts n' pieces. the stuff just works - pricey, but worth the money (IMHO). have had more than a few situations where a squirt of this goo has fixed a 'bug' or an issue almost instantaneously. my only 'beef' (if any) is the fact that it's a little tricky to control the volume of product being expelled from the nozzle as sometimes, it blasts out a bit too much of the goo & it gets a little messy (always keep a rag handy when using this product). the complimentary "DeoxIT" products are also quite phenomenal depending upon your specific needs/ application(s). i recommend these products universally (CAIG) & find them nonpareil having tried similar such goo's in the past. none can compare to the "DeoxIT" line-up. cheers!

Das Zeug hält seinen Preis aber es gibt meiner Meinung nach nichts besseres für Fader und Potentiometer.

Combiné avec Deoxit D5, très efficace pour redonner vie à vos potentiomètres qui crachotent. Produit cher mais résultat incomparable. Référence chez les pros du repair.

The best spray you can buy the rolls Royce of cleaning products! Worth every penny ! Cleaned my mixer djm 800 and 1200’s technics turntables ! Cleaning and lubrication ! You do not need to spray loads .. less is more .. I used it on a ddj sr2 controller that the pitch controller was playing up .. fixed ! This as I said is the best of the best spray that’s why I can see why the price is the price ! This will fix 8/10 issues on mixers ! No joke !

J'ai un power mixer audio pro 1212 qui date des années mi 90 c'est un bijou d'équipement. J'ai utililé un autre produit pour nettoyer et lubrifier mes Slide mais j'ai pas aimer le résultat, beaucoup de bruit et des endroit mort alors j'ai hésité avant d'utiliser un autre produit, Le Hosa f55 fait bien le travail, plus de bruit plus de point mort, je suis très satisfait et je pense garder mon mixer encore longtemps !

Perfetto...il migliore pulisci contatti al mondo. Usato per i potenziometri di una fender stratocaster custom shop e ha fatto miracoli. Per prova l'ho usato anche per ampli, hi-fi, radio vintage ecc...ha risolto quel rumore fastidioso che si crea quando giri i pot dei volumi o dei toni che nessun altro prodotto aveva risolto...10 stelle...