52 inch Indoor Ceiling Fan with LED Light and Remote Control - White Modern Ceiling Fan, Low Profile Mount, 4 Blades, For Bedroom, Living Room, or Kitchen, Quiet - Dempsey 59242, Fresh White

I am so excited about the look of this fan! It is perfect and very low profile for our low ceiling nursery room. The fan we replaced did not have a remote, so that will take a bit of getting used to, but not having the pull chain hanging down helps my husband from walking into it all the time AND it looks so much more appealing. I did take someone else's advice about having the Hunter logo face AWAY from the door and I am so happy I did, its a little large and in silver with black, it stands out a lot. Ok so onto the install. This is fairly easy as long as you have a basic idea of how electrical wiring works. White to white, green to green, etc. PLEASE make sure you have the circuit breaker off so you don't electrocute yourself! It took my husband about 60-90 minutes to install the whole thing. The directions were simple and easy to follow. We tried to test that the fan was working once that portion was installed. Keep in mind, the lights were not hooked up yet, so it was NOT a complete circuit. We found out, the unit does NOT function unless the entire thing is put together. We spent a solid 20 minutes up and down the stairs and adjusting wires. So avoid the hassle and install the whole thing and hope for the best! If you need to take parts off, it really isn't that hard. My husband installed the fan blades without the washers and I was worried they would be extra noisy, but no issue. Once we got it all together, we discovered the remote was NOT paired like it was supposed to be. No big issue, the directions tell you exactly what to do, we followed them and it worked great. Lastly, I thought the lights were supposed to be dimmable, however. they are not. I saw some other reviews suggest how to make them dimmable, I will try those steps and update. Our fan is on a dimmable dial instead of a switch, so I'm wondering if that is part of the problem. Overall, this fan looks modern and updated. The install was fairly simple and was easily done with one person (I was very good at supervising). The various fan speeds are great, I can't imagine we would ever use the high function, it literally created WIND in the small room! The fan is quiet, even without washers to hold the blades in place and the light is bright but not annoyingly so. I would definitely recommend and I am planning on slowly replacing all the fans in our home with these!!

Bought to replace a larger ceiling fan without remote in a 10x12 bedroom with 8 foot ceilings. The fan is contemporary and blends nicely into the white ceiling. On high the fan does a nice job of moving air. However, at the sides of the room I do not feel much airflow. Since this is over a bed the fan is perfect. If your room is larger you might want to choose a model with longer fan blades. The remote is nicely designed and includes a holder that fits over the current wall switch plate and still allows access to the existing wall switch. Dimmer function on light cycles between bright to dim, I would rather have a toggle (Lo -High) switch. There are three separate speed buttons 1 - 2 - 3 and 0 for Off Installation was about an hour. You need to have an existing ceiling box specified for a ceiling fan. The fan does not include the bolts to attach the fan mounting plate to the ceiling box (these are usually supplied with a ceiling fan mounting electrical box). The directions are complete but confusing. They include numbered steps with clear diagrams. However within each numbered steps are sub steps with text in rectangles which are not lettered such as 1A 1B 1C. Thus it is easy to miss a sub step that you must follow from left to right within the numbered section. If you have solid electrical power wires, such as Romex, you will want to strip additional insulation off of the fan wires which are copper stranded, before connecting or placing on the ceiling mount. Be careful one on the wires is an antenna for the remote. Installation requires that you also have to connect the remote receiver into the cap. Study the wiring instructions in advance. You hook the fan onto the ceiling plate to connect wires then raise fan to ceiling plate and attach screws. Each fan blade is attached with 3 separate screws. This was not easy. The fan blade has to be held against the attachment area within the fan base, that is black and angled. In order to line up the screws I had a friend shine a flashlight into the base of the fan so the light reflected through the screw holes from above. This made lining up the holes easier but the screws are flat head machine screws so you have to line everything up correctly. The fan is quiet on high and no fan blade noise. However, there is a faint motor hum. The motor is very quiet but I did notice the sound but very faint. I have another ceiling fan with a DC motor and it's silent. Overall, very happy with the fan. Hunter emblem is attached to side of fan housing. Did not see a way to remove it, but you can install fan ceiling mount base plate so emblem faces the direction you wish.

I installed two of these ceiling fans, and I'm generally satisfied with them. I needed a fan that didn't drop too far down from my ceilings (which aren't very tall, about 8'), had more than one light fixture (given that so many fans today can't handle high-wattage lights), and also had a remote. These look nice, and they're a good value. Perhaps most importantly, they work well as fans. The instructions were clear, so that helped the installation along. I'd never installed a fan before, but this went fairly smoothly (though I'm sure it helped that I was replacing existing fans). The main thing that stops me from giving five stars is the remote. Sometimes I have to hold it quite close to the fan for it to work, and I don't have very large rooms. I'm not sure why that is the case - sometimes turning it on is very easy, but turning it off is more difficult. Or vice versa, it's a bit annoying. It also didn't come with a remote holder, so I got a 3D printed one elsewhere on Amazon.

Love this fan!! So we’ll built! Perfect for the room we put it in! If I ever need to replace any other fan in my house, I will choose this one! Super simple to install...looks great! Quiet and just right!

Estoy contenta con este ventilador. Voy a comprar un segundo. Pero no recibir un suporte por el remoto control. Hay? Necisito dos.

Supero mis expectativas de funcionamiento y calidad del producto. Mantiene fresca la habitación

This fan is beautiful. Since my house is 100 years old it took some doing to figure out a way to rig up a support system in my ceiling, but the fan itself was very easy to install. It is my first ceiling fan so i have nothing to compare it to, but I think it's quiet. Just a soft hum from the motor. The fan is so attractive compared to most other fans. I have very low ceilings and the low profile works great for me.

Todo muy bien con el ventilador en los primeros días, silencioso y buena velocidad. El problema inicio en unos días después cuando comebzo a hacer un ruido muy molesto estando encendido. Hable directamente a Hunter y me comentaron que tal vez era que las aspas no estaban bien apretadas, degraciadamente el ruido continuaba aún sin ellas. Finalmente obtuve de respuesta que se debía a un error de fabrica y que me cambiaban el producto por uno nuevo. Al ser producto importado y a la insertidumbre de que tal vez quedaba fuera de la garantía decidí optar por la devolución de Amazon. En general me parecío muy buen producto y en verdad fue una lastima para mi por lo de la falla, pues en verdad el ventilador cumplía con mis necesidades. No esta demas mencionar que, obviamente, se dío por perdido el costo de la instalación y el retiro del ventilador