Classic Accessories StormPro Heavy-Duty Boat Cover, Fits Boats 12 ft - 14 ft Long x 68 in Wide

This boat cover is equal to many priced 2-3 times higher. The fabric is heavy duty. The buckle straps are in all the right places. Even the center post works well. I was blown away by the quality and fit.

We bought this boat cover in the fall of 2020, which means it’s been through 3 Oregon coast winters. No garage or shop available so it sits outside and this does the job. Keeps it completely, yes, completely, dry inside. We do have a snap on cover that just covers the mqzain boat area, but it was getting ruined and had to have a new one made for around $400, so we bought this cover to put over top as an extra layer of protection. It’s never wet between the two when we check throughout the winter. Our Jetcraft aluminum boat is 20’ long, 7.5’ wide, with a 26” swim deck/fish cooler shelf, on the back. It fits great. Our boat could be several inches wider and longer and it would still fit. The straps hold it securely to the boat trailer. The wind has never affected it a bit. It’s still in very good shape. We did just remove it for the summer and decided it needed a good bath to get the grime, bird droppings and spider webs washed off, so hauled out the pressure washer and cleaned it up a bunch. First time we’ve done that and like I said we’ve had it for almost 3 years. We used inch and a half PVC to put inside the gunnels, making a bit of an arch, to keep water from pooling. This company makes great covers. We just purchased our third truck camper cover from this company. The camper is more exposed to the wind than the boat and the fabric is different so every 3 years or so we have to replace that, but it also does an excellent job of keeping our camper dry and safe from the winter elements and an enormous amount of tree debris. I don’t think you’ll be disappointed with this boat cover. We’ll buy one again if this one ever needs replaced.

I like this tarp, it's fairly light so i can easily install and remove by myself. As mentioned in other reviews the stand is junk, without the stand the tarp turns into a lake so it is needed but it's so flimsy once you put pressure on it, it breaks the plastic at the joints. I covered mine in duct tape on each joint to try and hold it together but we have been having massive storms here and it just can't hold up and has broken the duct tape My latest try was using a solid piece of pvc pipe that the poles of the stand fit perfectly inside... there was another huge storm last night and so far holding up. In hindsight i should have thrown the stand away right away and built something solid although the PVC way i have it now feels pretty solid so that may be what you want to try right away. So if you get stand working correctly it repels water great, without it it does leak through when pooled up but not very fast. I don't imagine there would be any water just from rain hitting it. Also mine has turned purple in just a month of use. It's not that noticeable until i see some of the side material that has not been exposed to the sun. But the color i don't care about i just don't want to have to fix the stand every time it storms. I will add that the last time i had a huge pool in the tarp... we got 6 inches of rain overnight so if you can imagine it was a lot of water that pooled up, enough that i could barly move the tarp to get the water out so i know it put tremendous pressure on everything and nothing tore or broke so i was impressed with that.

Heavy duty cover that fits the boat really well. Comes with all tie downs and a post to keep the water from pooling on the cover. Excellent protection.

So the first boat I had came with a cover that did not strap down and it was more like cotton. It let water and dirt through it. The boat was always dirty and it eventually rotted out in the sun after one season of sitting next to the house. After that I purchased a shark skin cover travel cover. It was an exact fit for the boat. Kept the boat clean, but it did not breath well and over the course of the next summer the seats and some trim panels started warping from the heat. I do live in AZ. other than that the cover held up great. On to my new boat. I purchased a factory snap on cover from Yamaha. I thought that I would like that more than a full cover. / wrong. The factory cover did not even make it a year. It is tearing at the seams, tearing across the material and at the snaps. the material felt great but seems like it was never meant to see the light of day. I decided I wanted a full cover again but did not want to pay the price of a factory cover (especially after the last one) and The Shark skin was very expensive as well. Since my boat has an after market tower on it I figured I would go cheap, just in case I needed to cut something and sew in some velcro. My boat is 23ft so i go the cover that was listed up to 24ft. When I received it and un-boxed it I was immediately impressed. the cover came with a matching storage bag and even came with a post to hold the center up. The color is great and the material feels alot like the skark skin but even heavier. The cover fits the boar perfectly and even covers my tower, no cutting needed. it runs from front all the way to the back and covers the swim deck as well. The seams in it are very thick and doubled over and it even has two breathing ports at the back of the cover. I was excited to see those. The straps are long and many so you have plenty of places to tie it down and tighten it. If I had any complaint, it is that it sags quite a bit in the middle, but that is do to my tower preventing me from getting the sides real tight. I resolve that issue by running a rope back and forth across the tower to hold the middle up. This cover was less then half the price of my last one and blows it away for quality.

altamente recomendable, es una cubierta mas gruesa de lo que pense por el precio y se ajusta perfecto a mi lancha que en este caso es una tracker de 17'

The produce appeared good but the colour has faded from grey to pink and we havent put the boat on water yet. This is uk sunshine which we havent had a lot of so really disappointed expect it to go brittle and fall apart been on boat in our yard for 6 weeks. A lot if money for a sub standard product.

The cover fits well, but the baseplate for the vertical pole is weak. Mine has already broken. This prevents obtaining the tent shape, resulting in water ponding in the cover. Overall, this is ineffective. 17 February 2024. I contacted the manufacturer who has now sent a replacement. This review has been amended to take into account the good customer service. I have increased the stars from 3 to 5 accordingly.

Haven't travelled down the road with it on yet, but I mainly wanted it for on the 12' aluminum in the yard and it it easy to slip on and covers the boat from bow to over the motor perfectly. The attached straps snug it up nicely and the multi-piece pole works to hold up the center to eliminate pooling. The pole does fall over easily, but can be tied off through slots in the top flat area. Material is much thicker than a cheap plastic tarp. Has faded a bit in the sun over the heat of the last few weeks, but that should be expected. For the price I feel I got a great cover that fits nicely and is easy to put on and take off. Also comes in a nice bag of the same material for storage.

Buen producto y de buena calidad, ya le llovió y no se filtró, las fijaciones bien para el Remolque