AnNafi® Auxiliary Fuel Tank For Servicing Your Bike 300Ml | Fuel Tanks & Accessories | Workshop Tool Balancing Carbs Carburetor | Petrol 300ML Tank ROYAL ENFIELD BSA NORTON VINTAGE BIKES (ORANGE)

It leaked a little at first but after tightening a few things it works well

Out of the box, it was difficult to turn the valve on and there was no gas flowing down the tube. After I opened up the valve, I found it assembled with a punch of thick grease. I guess it was thought this would make it easier? After cleaning the grease and re-assembly, the valve knob worked very smoothly and the gas flowed as intended. Not sure if this is a one-time issue or not but it works well and I would purchase it again.

For years we used an old water heater bottle like grandmom used to have. This is a great update,plus, I can't find the old one. Hadn't needed one inn years. This is a good simple one to keep around for years to come.

The hose fit perfectly into gas pipe on bike. This mc had been sitting outside for 7 years and I'm still cleaning tank out. I wanted to be sure it would start and this iv tank worked great and bike started right up.

Doesn’t fit cruiser. Hose is too small. Have to rig it up.

Although it does work as intended, holds fuel as auxiliary tank. Don't fill to the top as there is no gasket and the slightest tilt when full causes it to leak. Also the petcock on the bottom drips slowly even when closed. Hose had to be replaced in my case as the diameter was too small for the carburetor I was using.

Great fuel bottle for running motorcycles without the gas tank. This was a must need for anyone that works on motorcycles.

Didn't have all the fitting I needed,but world well

cheaply made but a handy tool to have