Newdeli 45 Degree Router Bit, 1/2 Shank 45 Degree Lock Miter Router Bit, 1/2-inch Stock Lock Miter Woodworking Tools for 90-Degree Tenon Joint Woodworking

Llegaron en excelentes condiciones. Necesitaré hacer un update sobre la navaja / broca de router más adelante ya que le de uso. Por lo pronto se ve bien.

They worked. The blades are high quality. But there were no instructions for set up. I spent a while watching YouTube videos and cutting up scrap to practice with and got poor results on my project anyway. But here’s what I learned. 1) don’t even try to use these without first fine tuning your table and fence. Your set up needs to be perfect. 2) don’t even try to use these without substantial and copious feather boards. An auto-feeder would be ideal for longer boards but you’ll get away without it. 3. If you’re making a box or a hollow column and you have tried for hours to position the fence and blade perfectly for a perfect 45-degree bevel but it isn’t coming out exactly right, give up. It’s actually easier to have a slightly longer toungue on two sides and a slightly shorter tongue on the other two sides as long as you account for this by ripping to the correct width before doing your edges on the router table. You still end up with a perfect box and it’s actually easier to clamp up. Great product but if it’s your first time using this tool, you’ll want to do your homework first.

Run at medium to medium/slow speed and DO NOT attempt to do in one cut. I took 4 cuts and it worked great. The bit is excellent. Lumber must be exact thickness....3/4" for this bit.

Takes a little bit of knowledge and time to set this bit up correctly but when set up right it works very well and makes a nice joint. Recommend watching some videos on how to set up a Lock miter bit was very helpful for me.

They work surprisingly well. Just push or feed the material at half the speed you normally would and the joint turns out great. They do dull faster than other bits I’ve got but sharpening isn’t an issue.