110 Pcs Heat Shrink Wire Connectors, Solder Seal Butt Connectors Kit Waterproof Marine Electrical Splice Terminals

⚡️If you do any automotive, marine, or general electrical work, stop messing around with crimp connectors and buy this multipack of Heat Shrink Wire Connectors! This 110,piece set is an absolute must-have to keep on hand and delivers a connection that is superior in every way in my experience! ​⭐️The Solder Seal Difference: 📍The Rock-Solid Connection: The low-temperature solder ring in the middle melts quickly and reliably, creating a perfect, electrically sound bond that is stronger than any traditional crimp that I've done or attemptd in the past. There's no guesswork or worrying about pull-outs! 📍Weatherproof and Durable: As the heat shrink tubing shrinks, the internal adhesive melts, creating a completely watertight and corrosion-resistant seal. I've used these in underground fencing, electric fences, ATV's, Trailers, and on automotive wiring where exposure to moisture is guaranteed, and the connections have held up flawlessly! 📍Incredibly Easy to Use: All you need to do is simply strip your wires, insert them into the connector, and apply heat. The color-coding makes identifying the correct gauge simple, and the whole process has taken me less than 30 seconds per connection. They have always shrinked tight and look incredibly professional when finished! ​⚡️This multipack provides a great assortment of sizes for virtually any job. The quality has always turned out top-notch, and the reliability and durability that they have added to my projects are well worth the price. This is the only way I connect wires now. Highly, highly recommended! ⭐️⭐️⭐️⭐️⭐️

Great functionality and handy to have on hand. Permanent connectors with a solid electrical connection are less likely to corrode or break than a lot of compression types. You can overheat or underheat these and so some level of precision is required. However, it is not complex and when it counts these are very solid with the added bonus of built in heat shrink wraps around the fitting. Definitely a more professional look and fit than normal connectors.

I think the reviews complaining about these connectors are not using them correctly. They worked perfect for me. They have a strong hold better than crimping, an airtight seal, and if you use the proper size for the wire you're working with they shrink to a glove tight snug. I've had zero problems with connectivity on any of my projects. These are not regular heat shrink tubes. You can't use a lighter or a torch. A lighter won't melt the solder, and a torch will melt the tubing and your wire before it melts the solder. I used a heat gun I got off of Amazon for $20. It has two heat settings, and a reflector on it so the entire tube was heatedly evenly in seconds. Spend just a few extra seconds around the solder ring. Don't immediately try to pull on the connection. Of course it's going to come apart while it's still curing. These are made to withstand shaking and movement, not heavy weight pulling. No one is going to come and tug on your wires to pull them apart. All that aside, I absolutely recommend these shrink tubes to anyone who's doing at least minor automotive electrical wiring. I installed a dash cam, aftermarket radio, and rear view cam into my car using these and they have held up perfect. Short of it is, don't blame the product for human error.

These seem pretty good, but I found that soldering first creates a much stronger mechanical connection. I used a soldering iron to tin the ends, then soldered them together. No twisting the wires. Then I slid and centered the connector over the joint and used a heat gun to shrink each end of the connector. I found that shrinking the connector ends first, then applying heat to the middle worked best. By soldering first, the joint was mechanically very strong. Without soldering, the joint could be pulled apart with very little effort. The connector comes with some type of low melting point metal that will create good electrical contact, but it does not seem to mechanically bond to copper conductors. As far as whether these are waterproof, we'll see. They seem like they will work well in wet applications, but until I see how they perform over time, I'll reserve judgement. I will be using these to connect sprinkler system control valves to the control wires. One of my control valve boxes almost always has standing water, so it will be a good test.

Works well with torch or heat gun. Quick, easy, no crimping needed.

Excelente producto

This kit gets three stars because size wise is great. The sizes fit almost everything you could think of when needing to solder joints for wiring cars. I used this on my stereo equipment and lighting for my truck. The fiction great and hold together very well. They are easy to use and make wiring much easier than twist nuts. My concern on these is the solder itself. I have had a few that does not want to melt the solder. Most of them melt within seconds with a heat gun, but I have some that wouldn’t melt, even on the highest setting. Because if this I’m giving a 3 star review. For the price if this set, they aren’t terrible, but could be better.

Arrived as described. Worked well!