Draper Tyre Pressure Gauge with Flexible Hose | Handheld Dual Reading Gauge | Car Tyre Pressure Gauge | 69924, Blue

Well made, easy to use, accurate, cheap. Wow. I have a cheapo Halfords electronic gauge, but I never fully trust it, it keeps turning itself off while moving from one wheel to the next, and invariably needs a new battery when I come to use it. It also occasionally gets "stuck" and needs the battery taking out to reset it. So I wanted a good old mechanical one, and on top of that, one that copes well with high pressures. The tyres on our motorhome need to be at 70-80 psi, depending on load. This is brilliant. Lovely well-engineered feel to the brass components, nice protective rubber case on the gauge, a decent length hose so that you can always hold the gauge at a readable angle no matter where the valve is, and a handy button to release air if you need to, without having to keep pulling the nozzle off the valve. The dial responds instantly unlike the horrible dampened motion you seem to get on so many foot pumps etc. which are slow to respond and seem to give a different reading every time, and this one always gives the exact same reading. Very pleased with it, for the money it is a real bargain.

I bought this for my as I check tyre pressures regularly in my role , it is well made the valve push end is machined brass which bodes well for the quality , the hose is 200mm long so you can access a tyre valve easily and read the pressure indicated by facing the gauge toward you in any situation or angle . Once the required pessure has been reached or if you overfill a tyre no problem leave the gauge "pushed on the tyre valve" position and press the small pressure release stud on the gauge body, this lets air out until the desired pressure is reached perfect !. The gauge itself takes the reading and if done correctly the needle stays at that reading when you remove it from the tyre valve so you can record it or whatever , simply press the small pressure relief stud to reset the gauge for the next use . The gauge is graduated and seems very accurate for all purposes , my only slight disappointment is the gauge is not as legible to read at a glance as I'd like , and the readings are given in bar , psi , with no colour distinction between the two in say font or some other way of differentiating the scale . Plus being a middle aged guy my eyes are not as young as they once were ! . However the scale is still perfectly legible and usable , it's just a minor point that some with old eyes may find an annoyance but not insurmountable . All in all I'd give this product a solid 9.5 out of 10... BUY IT ...it's worth the small cost .

Simple and effective, really pleased with it. The only reason for not giving it 5 stars is that the cristal (which is not glass but plastic), scratches very easily, so you can't really leave it in a tool bag or similar despite the rubber cover. Apart from it, it is very precise and lasts well.

I ordered this to help prolong the life of my tyres by ensuring they are properly inflated. My tyre inflator has a built-in digital gauge, but this never quite agrees with the ones I've used at garages (they're all calibrated slightly differently), so I decided to go for a mechanical gauge, which should at least be consistent. This Draper gauge feels extremely well made, all parts are nice and solid. The dial is clear; although it's neither backlit nor luminous, it's still easily readable even in dim light. It connects quickly and easily just with a push onto my car tyre valves. After a couple of practices to get used to this, any pressure loss is insignificant. The needle shoots to the appropriate mark on the dial, and stays there when you remove the connector from the tyre valve (by trapping a little air kept under pressure). This makes for more comfortable reading (you don't have to keep it connected while reading the gauge). I like the pressure release button on the gauge, which serves two purposes. First, if you've over-inflated the tyre, pulsing the button with the gauge still attached to the tyre lets you bring the tyre pressure back down in a controlled way to exactly the right level (just keep an eye on the needle while pulsing the button). This is probably the best way to achieve accurate pressure in a tyre. Second, pressing the button *after* detaching and reading the gauge releases the trapped air and the needle returns to zero for the next measurement. I can't think of any negatives, other than it's larger than a pen-sized digital gauge. But I will probably keep it in the garage, not the glove box.

Excellent quality tyre pressure gauge for the price. I like the fact that it stores the pressure reading until the gauge is reset. Compact and lightweight.

For me this falls into the rare category of purchases that will pay for itself. Properly inflated tyres last longer and are safer - this gauge will ensure this for you. First off this is a quality mechanical gauge which reads up to 100psi/7 bar, so that will cover just about every type of vehicle on the road and certainly all cars. Second, I used plastic battery-powered digital gauges for years and this is a definite step-up in quality. It is very accurate and being made of metal (brass) will last years and vastly longer than the plastic battery gauges. Third, it is built with a pressure relief valve so after you have attached it to the tyre valve it retains the pressure reading until you press the relief valve, this is handy when taking readings in poor light, it is also a useful way of deflating over-pumped tyres. For the price being charged by Amazon this gauge is excellent value, you get a high quality gauge which will last years if not decades and save you money all that time. It should pay for itself. Strongly recommended.

Quite easy to use but probably wouldn't have bought if known about the plus or minus 2 psi error margin which is printed on the box.

Le mano semble costaud et bien fini, l’aiguille un peu large au niveau des graduations Bars atténue la précision de lecture mais franchement l’outil a l’air fiable.

Vorwort: Der erste Mineralölkonzern erhebt in meiner Heimatstadt eine Gebühr für etwas Luft für den Fahrzeugreifen . Der neue, vorhandene Automat, verlangt einen Euro, für 6 Minuten Nutzungsdauer. Die Konstruktion am unflexiblen Ventilgriff war so mangelhaft, dass eine Messung am vorderen Motorradreifenventil unmöglich war. Kein Kontaktansatz am Reifenventile. (Beides Speichenfelgen. Vorderrad gerades und Hinterrad rechtwinkliges Ventil). Was in der Vergangenheit problemlos verlief, war bei meiner Tankstelle jetzt nicht mehr möglich. Es versteht sich von selbst, dass ich als Stammkunde, diesen Anbieter in Zukunft meiden werde. Zum gekauften Reifendruck Manometer Draper 69924.. Ich bin Mitglied einiger Motorrad - Versandanbieter für Zubehör und habe mir auch Vorort einige Produkte anschauen können. Viel Plastik, hoher Preis und wenige positive Rezensionen. Wie fast immer , habe ich bei Amazon den besten Preis & Leistung Sieger für mich gefunden. *Das Messgerät macht einen wertigen Eindruck. Wenig Kunststoff, aber viel Messing und Metall. *Der flexible Schlauch mit einem 360 Grad , verdrehbaren Ventilkopf (Messing), bietet perfekte Anpassung zum Reifenventil. Auch die analoge Anzeigenuhr ist rundum drehbar und eine Überdrehung des Lüftschlauches somit ausgeschossen. *Der von mir bevorzugte Luftdruck von 2 bis 3 bar ist gut ablesbar und in der Skala jeweils um 0,1 bar unterteilt. Max. Luftdruck bis 7 bar/100psi. Messen Sie ohne Hektik ! Ventil korrekt ausrichten und ansetzen. Sofort erscheint der Messwert. Ein kaum merklicher Luftverlust entsteht beim schnellen entfernen der Ventilverbindung. **Der nun gemessene Messwert bleibt erhalten und fällt bei der Trennung nicht ab ! Gerade bei ungünstigen Lichtverhältnissen ist dieses sehr wichtig ! Drücken Sie das Luftablassventil und der Zeiger stellt sich wieder auf Null (Reset)). *Natürlich benötigt das Messgerät keine Batterien und ist daher immer Einsatzbereit. *Der Preis ist äußerst günstig. Danke Amazon Die Reifen für mein Auto, wie auch mein Motorrad habe ich mit Stickstoff befüllen lassen. Bei den Autoreifen war auf Monate kein Luftverlust feststellbar, bei meinem Motorradreifen fehlen mir noch die Erfahrungswerte. Zur Sicherheit steht noch ein Luftkompressor im Keller (schmunzel) zur Verfügung. Auf die mangelhaften , ausgeleierten Ventilköpfe an vielen fremden Tankstelle kann ich jetzt gerne verzichten. Ich habe mit dem Kauf die richtige Wahl getroffen und bin so unabhängig von jeder Tankstelle. Spart Zeit (muss nicht warten, ob der Automat gerade genutzt wird. Geld (1 Euro)für Luft und ich habe ein kleines Zeichen als “Endverbraucher” gesetzt. Danke Amazon für die schnell Belieferung und volle Punktzahl für das angebotene Produkt.

Great pressure gage. I was looking for a non China made gauge. Bummer that the japan ones don't have psi. This gauge seems accurate and has brass parts. I'm pretty sure it's quality made especially for the price

Molto compatto, e fa il suo dovere alla grande. Non ho avuto modo di verificarne la precisione, ma sicuramente è utile per confrontare la pressione tra i diversi pneumatici

Pequeño, resistente, protegido, calibrado, sencillo, fácil de usar y muestra calidad