Haga Plaster for Indoors and Outdoors 25 kg – Coat for Gel Plasters

Description

Area of application: both mineral colour as a primer for Haga Natural plaster base for plaster and chalk. Do you have absolutely no Sperrende or Diffusionshemmende effect, this is for your reference: on what surfaces can Durchschlagen. It is therefore possible that plasters and colours, despite primer to be drying out, and this fleckig, cloudy or differently. This is a purely visual appearance, quality and functionality are selbsverständlich. Famous examples: Plasterboard and Fermacell boards, the only partially (butt joints) gespachtelt are, glue residues from the distant wallpaper, etc. Aufgebrachten Haga plasters and colours to to can then very good drying out, at least a week wait time. The surface with the quick-drying Haga Lime colour usually further painting to make perfectly Raumklimafördernde Professional results. - Suitable for the following surfaces: All Surfaces need to be always be permanently Rock, strong, clean, dry, fat-free and Ausblühungsfrei. Slightly sanded but still stable surfaces Verfestigung once full Überrollen with Haga silicate in front of the coat. Remove old shiny latex Ölund Gloss Paint coatings can be or at least a with water and Anlaugen then Vorstreichen. On facades on old emulsion based paints only Vorstreichen with coarse, thick Sandhaltigen mineral plaster primer. - Manufactured: The mineral plaster base for undiluted or up to max. 10% diluted with clean water, depending on the absorbency traces. Thoroughly With mud mixer stir before use. Also during processing time and time again stir, as it does not only in strong dilution lift off. Drying time Min) and A4-80 Stainless Steel Screw Material. 24 hours. Do not use below + 5 °C for both air and surface temperature.