Portable Smart Button 1-Pack - Comes with 2 AAA Alkaline Batteries - Wireless Light Switch - Control with App

Very simple setup to control Wiz bulbs in my daughter’s room.

Very responsive. Easy to connect and very useful.

I ordered this switch to control my Wiz Connected Smart Bulb. The switch was easy to connect to the Bulb using the Wiz app. Switch works perfectly. Also love that holding the On (I) brightens the bulb and holding the Off (0) dims the bulb.

I have two of these. The first one connected just fine and has been working fine since. The second one would connect/pair but then wouldn't control the light at all. I did everything directions asked, I even tried to call support. Unfortunately with support, the language difference made it impossible to understand what they were asking from me. Ultimately, I gave up and returned it. It just wasn't worth the headache for me. I may try again another day in hopes it was just a bad button sent.

first of all pairing instructions inside are misleading. to pair the wireless button in the Wiz app you need to address it as a remote control, this little thing is not written in the instruction and i had to reach to Wiz support. the button is working as expected ,it has a built in magnet so it can be placed on the refrigerator\main door\etc which is great, however, i wanted it to control the 5 blubs i have in the kitchen, not sure why when i first installed it ,it managed to control only 1 bulb , and than removed and added again from the app and i was able to control 3, did same thing again and now i can control 4 out of 5 , hopefully some day it will turn on and off all the 5 bulbs :D .

Quick review: This button does exactly what you hope it would do. It's easy to install via the 3M sticky tape on the back of the wall mount, so no need for drilling or holes! Programming it in the Wiz app (v2) was straight forward and took less than 2 minutes. A bit of technical knowledge is useful when programing, but if you're adding physical buttons to your smart home, you [probably] already know that. It also functions as a dimmer switch, as well as full-on, full-off single button presses. You can link this button to a single lightbulb, rooms, or even multiple rooms full of lights. It's nice that you can remove the button from the wall mount and use it as a mobile remote. Just place it back in the mount when you're done and the magnets will hold it in place until the next time you need it. Longer Review: If you're like me, you love the concept of smart home automation. And if you're even more like me, you refuse to pay Philips Hue pricing for lightbulbs and peripherals. This lead me to buying multiple Amazon deals and sale items over the years, which meant I had to have 3-4 different apps on my phone to run them all. Yes, these apps can all be managed in groups by Alexa, Google Home, etc., but the fact is, there was no overall device that can send a lighting cue to multiple different brands of lights via Google or Alexa (that I found, anyways). It's also a drag when people who are visiting, and perhaps a bit less tech savvy, want to turn lights on and off with no physical switch in the room. It's unreasonable to expect my 65 year old father-in-law to bust out his phone, which he barely uses, to open an app and fumble around looking for the proper lighting groups in the house. That's where Wiz has changed the game. They sell plenty of different lighting and outlet options that all link to a single app (a very well designed, user-friendly app, might I add), that you then link to your Smart Home service of choice. They are affordably priced and the build quality seems on par with what you'd expect. The colors of the lights are accurate enough, although not as rich as Hue lights. But I can buy 8 Wiz bulbs for the price of 3 Hue bulbs, so I can live with that. We have since converted nearly all of our smart bulbs throughout the house over to Wiz and it's been a dream. We use this particular wireless button to control 4 bulbs in our living room (see the video review), and some of their wireless remotes throughout other rooms in the house to control different sections as needed. I was initially shocked at how simple these were to pair and setup via the Wiz V2 app. As mentioned before, programming and setting these up isn't for everybody, but chances are you will find their instructions easy enough to follow along. It runs off of 2 AAA batteries, which I haven't had to change yet (purchased this about 3 months ago). And stays connected to my wifi with 0 issues. If it has any weaknesses at all, I would say that the magnets in the button and wall mount could be a tad bit stronger. I have knocked it out of it's mount by mistake, but that falls under "user error", in my opinion. Under general use with proper care, this switch should last a long time. All in all, my family and guests have been very happy to have a physical button to press when they need lighting control, and I would recommend to anyone who's invested in the Wiz line of smart bulbs in their home or business.

Easy set up to connect and works great

I replaced my office lights- previously HALO LED downlights - with HALO’s smart offering to see how well they functioned compared to Govee. HALO smart LEDs use the Wiz Connected app. Since all my lights are smart I got rid of the wall switch and the utterly wasteful fan remote control mounted in a 2-gang switch box. I wired it so power is constantly available to the lights. I covered the box with a 2-gang screwless blank wallplate. I then mounted the smart button on the wall plate. So, now I can control the lights with a button or with my phone. That’s useful if my less tech-savvy partner wants to turn the lights off. Plus you can remove the button from the magnetic mount and carry it with you as a remote. I really like this solution

Cumple con su función simple de: Apagado/ Enciendido subir brillo/bajar Brillo lo compre para usar como boton físico ya que a veces es fastidioso controlar el foco qué utilizo con la app de wiz. tener este boton físico ubicado en un lugar de rápido acceso es mas comodo y rápido que estar controlandolo desde el cel. aparte lo puedes llevar donde quieras ya que lo puedes quitar del lugar donde esta puesto ya qué este se adhiere por imán. funciona como esperaba, rapida configuración recomendado👍🏻.

Love this! Used in place of wiring a smart switch and it work great.

Works great! Has a dimming option which is awesome

Los botones funcionan perfecto con las luces de la misma marca, son costosos, pero los encontramos en promoción y ayudaron muchísimo al ecosistema completo. Los productos Wiz son muy buenos

1. Función correctamente, trae pilas y es fácil de colocar el la pared. 2. Unico inconveniente es agregarlo a la aplicación ya que en los instructivos que trae no lo explican. 3. Se tiene que agregar como WizMoto y presionar 3 veces el botón de encendido (I) con eso ya lo detecta. 4. Solo controla los focos de una habitación.