TruXedo Pro X15 Soft Roll Up Truck Bed Tonneau Cover | 1497701 | Fits 2015 - 2024 Ford F-150 5' 7" Bed (67.1")

I'm delighted to provide a positive review for the TruXedo TruXport Soft Roll Up Truck Bed Tonneau Cover. This product has exceeded my expectations in multiple ways, making it a great functional addition to my F=150 truck at a great value. First and foremost, the installation process was pretty straight forward. Even for someone like me who isn't particularly handy, I found the instructions clear enough and I did the install myself and did not need to drill holes or alter the truck bed or gate. Six sturdy clamps hold the cover snuggly to the truck bed. When you close and lock your tailgate the cover cannot be unlocked by walk by snoopers. With just a few basic tools and minimal effort, I had the cover securely in place in less than one hour. It was a relief to discover that I didn't need to be a DIY expert to enjoy the benefits of this tonneau cover. One of the standout features of the TruXedo TruXport is its ability to keep the contents of my truck bed dry and out of sight. I've tested it in various weather conditions, from heavy rain to snow, and a high pressure car wash. There was dampness after the high pressure car wash, but no pooling of water. It has consistently lived up to its promise. It's reassuring to know that my cargo remains protected from the elements, whether it's expensive equipment or everyday items like groceries. I can roll it down and up without another person! Additionally, the TruXport tonneau cover adds a touch of style to my truck. Its sleek and low-profile design enhances the overall look of the vehicle, giving it a more polished and finished appearance. The pictures are the actual cover after driving over 1,000 miles through a Wyoming winter storm with 45 mile an hour cross winds, snow, ice and general pestilence! In conclusion, the TruXedo TruXport Soft Roll Up Truck Bed Tonneau Cover has been a great value and investment. It's easy to install, provides excellent protection against the weather, and adds a sleek and attractive finish to my truck. I highly recommend this product to any truck owner looking for a top-quality tonneau cover. It's a practical and stylish choice that I'm extremely satisfied with.

Fits the '23 F150 Lightning Lariat. Good quality. I have a spray in liner scheduled and this cover seems simple to pop on and off, so that's awesome.

I purchased this for my 2021 F-150 XLT 6.5' Bed. It's a perfect fit. I bought an open box version but it was in new condition when it arrived. Setup was simple but if you want it to be waterproof, you do have to pay attention to the directions to ensure the foam is in the correct place and that the gasket comes over the tailgate when you close it. It took me about an hour to install. In terms of durability, I've had this for a few months so far and it still looks like new. The material is solid and, unless someone decides to cut it, I don't expect anything to damage it for years to come. Stowing it is incredibly simple and takes about 30 seconds. Just roll the cover up and then there are two hooks on bungees that fit in loops to keep it secure. Reinstalling is even quicker: just unroll and latch. The only minor annoyances: - As I mentioned above, if you want waterproofness, the gasket has to come over the top of the tailgate which requires popping the latch on the cover every time you close the gate and then relatching the tonneau cover. It's a minor annoyance to me but others may feel differently. It seems most people don't bother with this step and they just let the gasket fold down. - When driving with the tailgate window open there is a very subtle flapping sound caused by the wind. I couldn't be happier with the quality.

Just purchased a second one of these Tonneau Covers. I like it and it works well but, depending on how often you open it, the Velcro that holds the top down will begin to fail in 3 to 4 years and by the time you get to 5+ years any side wind will blow the sides up from the rails. My current cover is so bad going through a car wash blows up both sides. No matter how much I press down when closing it, the sides will blow up if there is a 10 to 20 MPH wind coming from the side. Driving across South Dakota last week is was blowing up so bad I was afraid the wind would rip it and the cross bars would flail about. It got so bad at one point I wished I had a tie down strap to run from the wheel wells and across the top to hold it down. The latches are sturdy and that helped it stay in place but it sure looked like the side wind gusts were going to blow the top apart. Not a good feeling in the middle of nowhere. I like this cover, which is why I am purchasing a replacement, but be aware that the Velcro will go bad after a few years and there is no practical way to replace it. The Velcro straps that hold the rolled up cover in place both deteriorated from sun and weather and shredded after about 4 years. I ended up cutting them off so they didn't flap around the back window. Installation is not overly difficult once you figure out the trick for aligning the side rails so read the instructions carefully. For maximum life, position the side rails so that the vinyl top completely overlaps them. When washing the truck, use a hose to flush off the side rails but DO NOT use any sort of cloth to dry them. Lint from the cloth will get stuck in the Velcro on the side rails and is a tedious job to remove. There are what appear to be more durable Tonneau covers but this one works best for me. Soft covers are more forgiving about large loads than hard covers. All of the affordable hard covers I've found, especially the tri-fold, leave a portion of the bed covered when opened and that limits what I could carry in the truck bed. Other soft cover side rails are mounted inside the truck bed side rails and protrude into the bed space. This limits what I can put in the bed. (For example, I couldn't use my truck bed tent with them.) The TruXedo TruXport works best for me but it would be nice if there was a way to replace the parts (Velcro) that wear out after a few years.

The Pro X15 cover itself is very nice. Very low profile so it keeps the truck looking primo. I've had it for about six weeks now and it looks and performs great. Not completely waterproof, but it has been through major rain storms and sometimes no water gets in and other times there is some minor pooling. When it is stretched out it is very solid and I love the way it latches into place. The cover came in a box that was pretty beat up on arrival. Turns out one of the header stops was cracked during shipping. I contacted customer service and sent a photo of the issue and they called me back to confirm the part and immediately sent me a replacement. Like, next day response. (Thanks, Jamie!) Installation was straightforward. I watched a couple of videos for tips & tricks and was able to complete the install in about 30 minutes. It was very helpful to use clamps to keep the rails in place while installing. One tip is to not fasten the rails down fully until you have made sure the tailgate closes properly. I had to slide the rails to the very front of the bed before the tailgate would close. Also, read the instructions on the tension bolt as this adjusts the cover to the perfect tight fit. I'm about a 5 or 6 on a scale of 1-10 in terms of handyman abilities if that helps.

I had a $1,400 cover on my truck when I purchased it 5 years ago. I go thru the car wash quite regularly and that and I'm always opening and closing my Cover. I wanted to replace it with the same cover but I just couldn't spend the $1,400. I was thinking I could replace this cover 4 times if I wear it out. So I had low expatiations. Putting it on was simple and I did it by my self in like 10 to 15 minutes. I was worried it wouldn't lock like my last one. But it locks good. It looks great and it works well. I just got it and It's gone thru 4 car washes and looks the same as new. Time will tell. But I'm rather pleased with the quality. I'm not going to be able to place heavy object on top of it like my old one but no big deal.

I really appreciated the attention to detail regard the installation instructions. After laying out all the pieces and pre reading the instructions everything made sense to me and I was able to complete the installation in about 30-35 minutes. I was impressed with the engineering that went into this product. While it is a simple design, the way it works is great. I like the fact that the Velcro attachment has the ability to slide in the track to help the top stay tight and close easier. I put this on to avoid another year of snow filling the bed of the truck. Although it hasn't snowed much this year, it has done a great job of keeping the rain and snow out. I haven't had it on long enough to do any real mileage comparisons so I can't give any results on that aspect. I hope that the longevity exceeds my expectations but that remains to be seen.

Great product water proof