Cordless Heat Gun for Crafts,600℉Fast Heating,Rechargeable Mini Hot Air Gun for Shrink Wrapping,Epoxy Resin,Vinyl Wrap,Electronics,Candle Making,Embossing,Phone Repair,DIY

Works great! Battery is a little shorter span than I’d like but for the size, it’s perfect. Great for small and quick soldering projects heat shrink.

Would not power on for more than 20 seconds. Getting a replacement was difficult, so I canceled the order all together and sent item back

This was purchased for a different reason. This works perfectly as a dew remover for telescopes out in the field. It is small and I can use it numerous times to keep the dew on the front lens down. It is hot and you just have to judge how far away from the lens to remove the dew lasts throughout the night.

Convenient, Lightweight, decent build quality and not very expensive. Cons: battery does not last long in use, even worse does not hold a charge very long at all between uses. You have to know in advance before you are going to use it and let it charge for a few hours or it will disappoint you. Overall would give this 5 dstars if it wasn't for the battery performance, but since the major reason for buying this was the convenience of not having to plug it in, I dinged it 2 stars.

Doesn't hold a very long charger. Have to carry extra battery banks and can't use while charging.

This little heat gun has worked great so far! And as you can see in the picture I took with a thermal camera, it really does get up to about 600℉. I realize that the picture only shows the temperature at 574.1℉ but that was the best that I could do. I still don't really have a lot of experience using a thermal camera, and the temperature would fluctuate depending on where I would face the mini heat gun. It sure didn't feel like it was blowing that hot, but apparently it is. It certainly blows hot enough so that I can't keep my hand in front of it. Anyway, it sure is easy to use. However, you might hold down the button for a few seconds and have nothing happen. And that might be because they say to hold down the button for like 3 seconds to turn it on, yet your particular mini heat gun might take holding down the button for a little longer before it starts up. With mine it seems like I have to hold down the button for 5 or 6 seconds. Which isn't a big deal really, as long as you realize that could be possible and to try it instead of just assuming that if it doesn't kick on in exactly 3 seconds then it doesn't work. Well, once it's on with the blue light on, it's just blowing around the room temperature air. When you are ready though, you just push the power button, like the regular quick press of a button, and the light should turn red and the heating element should come on. You will know for sure that it is on because the tip of the mini heat gun will be emitting an orange color. And then from there, you can push the button again and go back to the blue fan mode, and then again to go back to the red heating mode, and on and on and on, lol. When you are ready to turn it off you just hold down the button until it shuts off. Just like powering it on though, it might take longer than holding it down for 3 seconds to turn it off.

This is extremely handy and completely changed my creations making. So easy to not de end on a plug. I make everything more comfortably ⭐️⭐️⭐️⭐️⭐️ 😍

Didn’t work from the first full charge! Literally wouldn’t do anything. Lost in a move, but the time I found it the return window had closed.

البطاريه لا تعمل اكثر من ٣ دقايق