Trail Rail System Truck Bed Tie Down Rail Compatible with 2020-2025 Jeep Gladiator Replace# 82215956

Perfect fit for 2020 Mojave Gladiator. The bed has a factory spray in bed liner. All we had to do is take a tap to clear/clean the threaded holes in the bed and these bolted right on with zero problems! Not including the tapping, these were installed within 15 minutes. Very satisfied. Can't tell the difference from OEM/Mopar.

Works great exactly like Mopar but way cheaper! I needed the rail system for the Alu Cab topper I installed on my 25 Mojave. Very happy with my purchase

Fits like OEM. The reviews complaining about the installation instructions are partially right. They don't actually tell you to install backwards if you look at the pictures, but there are arrows that say "FWD" that seem to point in random directions, including toward the tailgate.

At a fraction of the cost of the Mopar cargo rails, I figured these were worth a try. The box came with some tape cut and re-taped but all the pieces were still present and the rails in good condition. During the install, there are four screws labelled "F" shown to attach the front rail to the bed. Looking at the part list on the first page of the instructions, there is not a "F" bolt shown. I counted the "D" bolts and there were enough for all the holes and used those instead. On the next step, it showed an arrow pointing FWD supposedly indicating the front of the truck however it was pointing to the rear of the truck. Honestly, it was pretty easy to figure out that their instructions were not correct and I was able to finish installing the rest of the rails.Overall I think these are pretty good. I have a tonneau cover on the bed of my truck so they won't be exposed to direct weather so I expect them to hold up well. I did use a tap to clear the factory bed liner from the screw holes so I didn't have any issues getting the bolts in like some of the other reviews had stated.

Zero issues installing and using this trail rail kit in my Gladiator. I chased the factory threaded holes with a 6mm tap prior to installing.

Does it work, yes. However, if your bed has the factory spray in liner it is very difficult to get the supplied screws started. After stripping one of the supplied screws, I got a higher quality bolt of the same size and cleared the threads in the bed. The rails fit but the mounting hardware leaves a lot to be desired. It is also much more difficult to mount a bed cover over the rails.

Everything fits perfectly and works well.

Work great and look great on my 2021 Gladiator Mojave. Like others have said if you have a spray in bed liner you will have to tap the holes which was very easy. A tap set at Lowe's was $14.